Lenovo™
Skip to main content
Country / region  (Select)     English (Change)
 
     Home      Products      Support & downloads      My account      About Lenovo
 
Infrared driver for Windows NT 4.0 - ThinkPad 365X/XD, 380, 385, 560, 600, 755, 760, 770
Applicable countries and regions
This package provides the infrared communication driver to support IrDA (Infrared Data Association) 1.0 infrared communication protocol for Windows NT 4.0 users.

The driver supports point-to-point IR communication either with another ThinkPad computero r with a system equipped with an infrared port. This feature also supports the Generic (IrDA 1.0) mode up to 115000 BPS. This mode is used when communicating with other IBM ThinkPad computers.

Dial-Up Networking between the two computers through serial IR can be used as the Windows NT typical IR application.

This diskette enables or updates the infrared communication function of the following ThinkPad computers:
- ThinkPad 365X, 365XD
- ThinkPad 380, 380D, 380E, 380ED, 385D, 385ED, 380XD, 385XD, 380Z
- ThinkPad 560, 560E, 560X, 560Z
- ThinkPad 600, 600E
- ThinkPad 755CD, 755CDV, 755CE, 755CSE, 755CV, 755CX
- ThinkPad 760C, 760CD, 760L, 760LD, 760E, 760ED, 760EL, 760ELD, 760XD, 760XL, 765D, 765L
- ThinkPad 770, 770E, 770ED
File details
Version: 1.12
Release Date: 1998/10/19
 File link     File size     File description
irtpgwnt.exe     300,032     Infrared Feature Driver Package (v1.12) for Windows NT 4.0: ThinkPad 365X, 365XD, 380, 380D, 380E, 385D, 385ED, 560, 560E, 560X, 560Z, 600, 600E, 755CD, 755CDV, 755CE, 755CSE, 755CV, 755CX, 760C, 760CD, 760E, 760ED, 760EL, 760ELD, 760L, 760LD, 760XD, 76

irtpgwnt.txt     5,257     README: Infrared Feature Driver Package (v1.12) for Windows NT 4.0: ThinkPad 365X, 365XD, 380, 380D, 380E, 385D, 385ED, 560, 560E, 560X, 560Z, 600, 600E, 755CD, 755CDV, 755CE, 755CSE, 755CV, 755CX, 760C, 760CD, 760E, 760ED, 760EL, 760ELD, 760L, 760LD, 7

Additional information
Released Version
Version 1.00 Initial release
Version 1.10 Support for new models and a new function
Version 1.11 Support for new models and a problem fix
Version 1.12 Support for new models and a new function

Summary of Changes
1.10
-(New) Support for ThinkPad 380, 380D, 380E, 380ED, 385D, 385ED, 560E, 760XD, 760XL, 765D, 765L and 770.
-(New) Enabled automatic IR COM port assign. When IR COM port is by the ThinkPad Utility, IR COM port is reconfigured automatically. No registry update or change is required.

1.11
-(New) Support for ThinkPad 770E, 770ED, 600, 560X, 560Z, 380XD, 385XD and 380Z.
-(Fix) Fix the IR driver load problem when IBM AntiVirus 3.0 is installed on French version NT4.0.

1.12
-(New) Support for ThinkPad 770X, 600E
-(New) Support silent install ( install/s )

Installation instructions
To determine if you have to update the infrared communication driver or not, please refer to the "Summary of Changes" section.

Notice
If you install the Windows NT Service Pack after installing the IR driver, it is necessary to re-install the IR. This IR driver replaces the Microsoft driver serial.sys.

1. Log on the Windows NT with the administrator's password.
2. Extract the drivers onto the hard disk.
3. Click on Start -> Run...
4. Type C:\DRIVERS\WNT\INFRARED\INSTALL ; then press Enter or click on OK to start the installation. The Windows NT Setup window appears.
5. Follow the instructions on the screen.
6. Shut down and restart the computer.

When the device driver is installed, the infrared port is configured as a COM1 (IRQ4/Base IO address 3F8h) serial device. This is the default setting.

If your IR port is not enabled as COM1, loading the infrared driver will fail. You know the driver failed to load if you see the Windows NT Event Viewer.

To enable the infrared port for COM1 on your computer, do the following:
1. Run ThinkPad Feature program and enable the IR device as COM1.
2. Shut down and restart the computer.

Changing the Infrared COM Port Number
When you need to use an IR port other than the default value for example, to change to COM2, do the following:

1. Run ThinkPad Feature program and change the IR device COM port number to COM2.
2. Shutdown and restart your computer.

After your computer is restarted, IR COM port will be changed.
 
Applicable countries and regions
Worldwide

Back to top

Document id:  BBOD-3MCHT3
Last modified:  2004-07-12
Copyright © 2009 IBM Corporation
Copyright © Lenovo 2009, all rights reserved
 
Document options
Printable version 
Warranty Upgrade
warranty_upgrade

Act Now


Lenovo Forums

Get help at Lenovo Forums


Lenovo RSS Feeds

rss_icon.gif

Subscribe to downloads and drivers updates


Take our survey
http://www.lenovo.com/i/v15/icons/cvm_plus.gif Help us improve your visit

Printable version



    Terms of use Privacy Contact