1. Click Start, select Settings, and then click Control Panel.
2. Double-click Add/Remove Programs.
3. Select ConfigSafe and then click Add/Remove. Then following message appears "ConfigSafe will be uninstalled from C:\CFGSAFE. Uninstalling will delete all files in the ConfigSafe directory and remove the directory".
4. Click OK.
5. After the uninstallation is complete, click OK.

1. Click Start, select Programs, select Norton AntiVirus, and then click Uninstall AntiVirus. The following message appears: "Are you sure you want to completely remove 'Norton AntiVirus' and all of its components?"
2. Click Yes. During the uninstall process, the following message appears: "Remove Shared File?"
3. Click No To All.
4. Click OK.

• C:\ThinkPad\SSELECT
• TCC - ThinkPad Customization CD
• Software Selections CD

Upgrading to Windows 98 Second Edition from a Windows 95 preload
The same procedure used to install the Windows 98 Gold (1998 released version) upgrade can be used to install Windows 98 Second Edition. This contains how to update the BIOS, Device Driver, Utilities and Windows 98 installation for each system.

Upgrading to Windows 98 Second Edition from a Windows 98 Gold preload
We recommend to update BIOS, Device Drivers and Utilities the latest version for Windows 98. Visit the Software and device driver file matrices to download the latest drivers.

Installing Windows 98 Second Edition to a blank hard disk drive and other information
The installation procedures are the same as Windows 98 Gold. Please refer to the installation instructions in the Hint & Tips section under the Software installation/configuration category.

Power management setup
NOTES:

• Windows 98 Second Edition supports power and system management methods called advanced configuration and power interface (ACPI) and advanced power management (APM). While ACPI shows a great deal of promise for the future, it is recommended that you run Windows 98 Second Edition in APM mode. (ThinkPad systems with Windows 98 pre-installed are shipped with APM enabled.)
• Certain ThinkPad systems are ACPI Ready. ACPI Ready means that ACPI is not installed, but the system hardware and BIOS support ACPI.
• During the installation process of Windows 98 Second Edition, if it detects a BIOS date of 12/2/99 or later, it will automatically install itself in ACPI mode.

To correctly install Windows 98 Second Edition in APM mode, please follow the instructions outlined below.

Upgrading from Windows 95/98
Click here to obtain apminst.reg for installing Windows 98 SE in APM mode.

1. Start Windows 95/98
2. Click Startand then click Run.
3. Click Browse to locate the file apminst.reg.
4. Select apminst.reg, click Open, and then click OK. The registry editor message "Information in apminst.reg has been successfully entered into the registry" appears.
5. Click OK to continue.
6. Start the upgrade process to Windows 98 Second Edition.

1. Provide a bootable floppy disk such as the Emergency Boot disk for Windows 95/98.
2. Copy the file apminst.inf to the bootable floppy disk.
3. Insert the Windows 98 SE CD (Retail) into the CD-ROM drive.
4. Boot the system and format drive C: prior to installing Windows 98 SE.
5. Change to the CD-ROM drive (for example E:) that has the Windows 98 SE CD-ROM media.
6. Change the directory to E:\Win98 (where E: is CD-ROM drive letter)
7. Type E:\>setup a:\APMINST.INF and press Enter .
8. Follow the instruction of Windows 98 Second Edition Install program.