|
At a glance
The 10/100 EtherJet PCI Management Adapter provides 10BASE-T Ethernet and 100BASE-TX Fast Ethernet LAN attachment for PCs with a PCI bus interface.
Features
- Industry-leading performance, with excellent throughput and CPU utilization
- Advanced manageability features (such as Wake on LAN and PXE-compliant remote boot support) to help lower your cost of ownership
- Support for packet prioritization (IEEE 802.1p) and Virtual LANs (802.1q)
- Lower power consumption than earlier versions
- Simple installation with Plug and Play and auto-negotiation of speed and duplex mode
Warranty
Lifetime limited
This product replaces
10/100 EtherJet PCI Adapter with Wake on LAN - 08L2565
Packaging
- Adapter
- EtherJet PCI
- Installation and User's Guide and drivers on CD-ROM
- Auxiliary power supply cables (1 set of 2 cables)
Product marketing and FRU part number(s)
Part numbers applicable to: worldwide
- Marketing part number: 34L1201
- FRU part number: 34L1209
This product was replaced by
Intel Pro/100S Desktop Adapter 1-pack - 22P4501
Additional part numbers
Part number(s) for ordering multiple quantities
- Card pack: 34L1210
- Card packs are shipped in quantities of as many as 10 adapters per overpack box.
This product was replaced by
Intel Pro/100S Desktop Adapter CD-pack - 22P4510
Product dates
Worldwide
- Announce Date: 23 Mar 1999
- Planned Availability Date: 30 Apr 1999
- Withdrawal Date: 26 Feb 2002
Technical specifications
Physical, environmental, and compatibility specifications as known at time of announcement
Weight
Height
Width
Depth
Operating temperature
- Between 0 degrees Celsius and 55 degrees Celsius
Relative humidity
- Operating: between 8% and 80%
Hardware requirements
The 10/100 EtherJet PCI Management Adapter can be installed in any PCI-slot equipped, Intel processor 80486, or higher, PC. Use of the Wake on LAN function requires a PC that supports Wake on LAN and has an auxiliary +5V/3.3V power supply.
A network adapter cable is not included with these adapters. For 100BASE-TX operation, a UTP-5 cable with an RJ-45 connector is required. For 10BASE-T operation, a UTP-3, -4, or -5 cable is required.
Software requirements
There is no mandatory software; however, an operating system that supports networking is required. Device drivers for all leading operating systems are provided. A software program such as LAN Client Control Manager, or equivalent, is recommended for use with the Wake on LAN feature.
Supported operating systems
The EtherJet adapter is shipped with device drivers for all leading operating systems and network operating systems. The following software and networking environments are supported:
- Microsoft Windows 95 and Windows 98
- Windows NT 3.51, Windows 4.0, and Windows 2000 Beta
- Novell Netware 3.11, 3.12, 4.1x, 5 Server
- SCO Open Desktop 3.0, Open Server 5.0, UnixWare 2.1 and 7
- Microsoft LAN Manager
- Windows for Workgroups, Version 3.11
- OS/2 Warp, OS/2 Warp Connect, OS/2 Version 2.11, or later, and OS/2 SMP Version 2.11, or late
|
