|
At a glance
The 10/100 Ethernet Adapter (Low Profile Enabled) brings you a high performance network interface based on the advanced PCI local bus platform.
It supports:
- 32-bit data transfer with bus master architecture
- Advanced Configuration and Power Interface (ACPI) to reduce power consumption through better coordination with the operating system
- Wake-On-LAN (WOL) for remote wake up after hours
- OnNow/PC99 for instant bootup
The WOL feature lets the network administrator remotely wake up any computer after hours. With PCI 2.2 systems, all WOL signaling and power connections are via the PCI BUS connector between the adapter and the system. When the Desktop Management Interface (DMI) Agent is installed, this card lets network administrators take full control over all the desktop hardware and software resources on the network. The adapter uses a single RJ-45 connection and comes with a standard height PCI 2.2 bracket installed. It includes a low-profile PCI bracket to allow installation in the latest low profile systems. The adapter conforms to IEEE 802.3u 100BASE-TX, IEEE802.3 10BASE-T standard and meets PCI local bus revision 2.2 specifications. The 10/100 Mbps speed supports half- and full-duplex mode and is auto-sensed by auto negotiation technology that conforms to the IEEE 802.3u standard. Extensive drivers for commonly used network operation systems such as Microsoft Windows 95, 98, 2000, NT 4.0, OS/2 LAN Server, and Novell NetWare 4.x, 5.0 are supported.
The 10/100 Ethernet Adapter (Low Profile Enabled) provides a low cost, high-performance connection to 10Base-T or 100Base-TX. Features
include:
- 10/100 Mbps dual speed auto negotiation
- 10/100 Mbps full-duplex operation
- Automatic I/O address and IRQ setup
- Single RJ-45 connector for 10/100 Mbps operation
- 32-bit data transfer with bus master for PCI interface
- Three diagnostic LEDs for 10M link, 100M link, activity
- Low power consumption and sleep mode
- Microsoft OnNow/PC99 compliance
- Support Magic Packet mode Wake-On-LAN (WOL) function
- Support Advanced Configuration and Power Interface (ACPI) 1.0b Specification
- Support PCI Bus Power Management Specification 1.1
- PCI 2.2 compliant
- DMI 2.0 support
- Microsoft PC99 compliance, Windows 2000 certification
Warranty
- Lifetime limited customer carry-in exchange
Packaging
You will receive one box containing the following items:
10/100 Ethernet Adapter (Low Profile Enabled) (Option with Hard Copy Manuals and Software on CD) (19K4301)
This product was replaced by
- Intel PRO/100S Desktop Adapter 1-pack - 22P4501
- 10/100 Ethernet Adapter (Low Profile Enabled) (Card Pack) (19K4310)
Product marketing and replacement part numbers (FRU)
Part numbers applicable to: World Wide
- Marketing part number: 19K4301
- Replacement part number (FRU): 19K4309
Not available in Korea and Taiwan
Product dates
Worldwide
- Announce date: 06 Jun 2000
- Planned availability date: 15 Jun 2000
- Effective withdrawal date: 26 Feb 2002
Technical specifications
Performance specifications as known at time of announcement
This adapter supports data transfer at 10Mbps and 100Mbps depending on the hub or switch it connects into.
Physical, environmental, and compatibility specifications as known at time of announcement
Operating temperature
- Between 0 degrees Celsius and 50 degrees Celsius
- Between 32 degrees Fahrenheit and 122 degrees Fahrenheit
Relative humidity
- Operating: between 5% and 95% (non-condensing)
Agency approvals
- FCC part 15, Subpart J Class B
- UL
- CE Mark
- CISPR 22 Class B
- VCCI Class 2
Hardware requirements
The 10/100 Ethernet Adapter (Low Profile Enabled) is supported on all PCI 2.2 compliant systems. The adapter includes a low profile PCI bracket to allow installation in low profile systems.
Hardware requirements for other systems
The 10/100 Ethernet Adapter (Low Profile Enabled) is supported on other systems that accept half-size PCI 2.2-compliant adapters.
Supported operating systems
- Microsoft Windows NT 4.0
- Windows 95
- Windows 98
- Windows 2000
- Novell Novell NetWare 4.x, 5.0
- OS/2 LAN Server
Compatibility
This adapter is compatible with PCI 2.2, DMI 2.0, ACPI, Microsoft PC99 certification (WHQL), IEEE 802.3x.
|
