• (Fix) Fix the problem that the setup does not copy some modem parameters into registory on Microsoft Windows 95.

Click here for a complete list of changes fixed by this driver update.

• This package supports both systems with and without the Wireless LAN.
• The driver version is changed from 3.x.x to 2.x.x. This is because there are some big changes to the driver internal. Although the driver functionality is completely the same. Even though the number of the version is reduced from 3.x.x to 2.x.x, the 2.x.x is the newer version.
• ThinkPad Software Installer provides install and uninstall wizards for this package.

Windows 95/98

1. Start Windows.
2. Extract this package onto the hard disk drive.
3. Click Start and then click Run.
4. In the Run dialog window, specify W98/SETUP.EXE with the full path name where you extracted the package in the step 2, and click OK.
5. Follow the instructions on the screen.
6. Restart the system for the driver to be effective.

Windows NT 4.0

1. Start Windows NT4.0.
2. Logon with administrative privileges.
3. Extract this package onto the hard disk drive.
4. Click Start, then click Run.
5. Specify NT4/SETUP.EXE with the full path name where you extracted the package in the step 2, and click OK.
6. Follow the instructions.
7. Restart the system for the driver to be effective.

Windows Me

1. Start Windows Me.
2. Extract this package onto the hard disk drive.
3. Click Start and then click Run.
4. In the Run dialog window, specify WME/SETUP.EXE with the full path name where you extracted the package in the step 2, and click OK.
5. Follow the instructions. If you see the message "Digital Signature Not Found", click the OK button to continue installing.
6. Restart the system for the driver to be effective.

Windows 2000/XP

1. Start Windows XP and logon with administrative privileges.
2. Extract this package onto the hard disk drive.
3. Click Start and then click Run.
4. Specify W2KXP/SETUP.EXE with the full path name where you extracted the package in the step 2, and click OK.
5. Follow the instructions. If you see the message "Digital Signature Not Found" appears, please click the OK button to continue installing.
6. Restart the system for the driver to be effective.
   
   

1. Start Windows 95/98.
2. Extract the drivers to the hard disk drive. (Assume the location of extracted files is C:\Drivers\Win\Modem)
3. Click Start and then click Run.
4. Type C:\Drivers\Win\Modem\W98\Setup.exe -S, and click OK.

Windows NT 4.0

1. Start Windows NT4.0.
2. Logon with administrative privileges.
3. Extract the drivers to the hard disk drive. (Assume the location of extracted files is C:\Drivers\Win\Modem)
4. Click Start, then click Run.
5. Type C:\Drivers\Win\Modem\NT4\Setup.exe -S, then click OK.

Windows Me

1. Start Windows Me.
2. Extract the drivers to the hard disk drive. (Assume the location of extracted files is C:\Drivers\Win\Modem)
3. Click Start, then click Run.
4. Type C:\Drivers\Win\Modem\WME\Setup.exe -S, then click OK.

Windows 2000/XP

1. Start Windows.
2. Logon with administrative privileges.
3. Extract the drivers to the hard disk drive. (Assume the location of extracted files is C:\Drivers\Win\Modem)
4. Click Start, then click Run.
5. Type C:\Drivers\Win\Modem\W2KXP\Setup.exe -S, then click OK.
   
   

1. Start Windows.
2. Click Start, select Settings, then click Control Panel.
3. Double-click Add/Remove Programs icon in the Control Panel.
4. Select Agere Systems AC'97 Modem.
5. Click the Add/Remove button.
6. Click the Yes button in the confirmation window.
7. When asked to restart the system, click Yes.
   NOTE: If you do not remove the modem hardware, Windows will detect the modem in the next boot.

Windows NT 4.0

1. Start Windows NT4.0.
2. Logon with administrative privileges.
3. Click Start, select Settings, then click Control Panel.
4. Double-click Add/Remove Programs icon in the Control Panel.
5. Select Lucent Technologies Soft Modem AMR.
6. Click Add/Remove button.
7. Click Yes button in the confirmation window.
8. When asked to restart the system, click Yes.

Windows Me

1. Start Windows Me.
2. Click Start, point to Settings, then click Control Panel.
3. Double-click Add/Remove Programs icon in the Control Panel.
4. Select Agere Systems AC'97 Modem.
5. Click Add/Remove.
6. Click Yes in the confirmation window.
7. When asked to restart the system, click Yes.

Windows 2000/XP

1. Start Windows.
2. Logon with administrative privileges.
3. Click Start, point to Settings(Windows 2000), then click Control Panel.
4. Double-click(Windows 2000) or Single-click(Windows XP)Add/Remove Programs icon.
5. Select Agere Systems AC'97 Modem.
6. Click Change/Remove.
7. Click Yes button in the confirmation window.
8. When asked to restart the system, click Yes.
   
   If you use Windows other than Windows NT4.0 and if you don't remove the modem H/W, the Windows detect the modem in the next boot.

1. Start Windows 95/98.
2. Click Start, point to Settings, then click Control Panel.
3. Double-click Modems icon.
4. Click Diagnostics tab.
5. Select COM port with the name Agere Systems AC'97 Modem.
6. Click More Info button.
7. Check Command | Response window to check the result of ATI3. The version of the driver installed is displayed.

Windows NT4.0

1. Start Windows NT.
2. Double-click My Computer.
3. Double-click C:.
4. Double-click Winnt or Winnt40 folder.
5. Double-click System32 folder.
6. Find the file named AGRSMNT.SYS, right-click the icon, then click Properties. You can find the driver version in the Version tab.

Windows Me

1. Start Windows Me.
2. Click Start, point to Settings, then click Control Panel.
3. Double-click Modems icon.
4. Click Diagnostics tab.
5. Select COM port with the name Agere Systems AC'97 Modem.
6. Click More Info button.
7. Check Command | Response window to check the result of ATI3. The version of the driver installed is displayed.

Windows 2000

1. Start Windows 2000.
2. Click Start, point to Settings, then click Control Panel.
3. Double-click Phone and Modem Options icon.
4. Click Modems tab.
5. Select Agere Systems AC'97 Modem then click Properties button.
6. Select Diagnostics tab and click Query Modem button.
7. Check Command | Response window to check the result of ATI3. The version of the driver installed is displayed.

Windows XP

1. Start Windows XP.
2. Click Start, then click Control Panel.
3. Click Printers and Other Hardware, then click Phone and Modem Options icon. Or double-click Phone and Modem Options icon.
4. Click Modems tab.
5. Select Agere Systems AC'97 Modem then click Properties button.
6. Select Diagnostics tab and click Query Modem button.
7. Check Command | Response window to check the result of ATI3. The version of the driver installed is displayed.
   
   

• To use these functions, you have to use telephone line that has the Call waiting function and the Caller ID function, which each country or region sets independently. And you also have to Connect to an ISP access point that is compatible with these functions. Check with your ISP.
• The Modem on Hold (MoH) function has been tested and shown to work in the United States and Canada. It may not work correctly in other countries.
• To use MoH and Fast Connect function, you have to run the MoH application first and enable each function:
  1. Click Start and then click Run.
  2. Type C:\Program Files\Itmoh\Itmoh.exe and click OK.
  3. Right-click the MoH icon in the task tray.
  4. Select Modem On Hold Settings.
  5. Check Enable Call Waiting.
  6. Check Enable Fast Connect.
• Fast Connect function works well if you dial to the same phone number from only one place. Otherwise, it is better to disable Fast Connect function.