Note: Microsoft Windows XP Service Pack 2 includes all necessary support files for this device. If the system is initially setup with Service Pack 2, or is later updated to Service Pack 2, this device will be correctly identified and installed. If Service Pack 2 is installed, there are no additional steps required to support the Secure Digital (SD) card slot.

If the preload is not to be used, it is recommended that the entire contents of C:\IBMTOOLS be copied from the original preload onto the custom image to ensure all available hot fixes, initial driver support, etc. are available on the image being implemented. If the original preload has been deleted, it should be restored in order to obtain this software.

• ThinkPad X40
• ThinkPad X60
  
  

1. To install the Secure Digital Host Controller driver, do the following:
   1. For Windows XP:
      1. Click Start then Control Panel
      2. Click Printers and Other Hardware
      3. Click Add Hardware (on the left under See Also)
      4. Click Next then select Yes, I have already connected the hardware and click Next
      5. Select PCI Device, then click Next and Finish. The Hardware Update wizard will start
      6. Select Install from a list or specific location (Advanced), and click Next
      7. Select Search for the best driver in these locations
      8. Check Include this location in the search: then input the location C:\IBMTOOLS\DRIVERS\SDIO and click Next
      9. Follow the instructions to complete the installation
   2. For Windows 2000:
      1. Click Start, Settings, Control Panel
      2. Click Add/Remove Hardware
      3. Click Next, select Add/Troubleshoot a device and click Next
      4. Select PCI Device and click Next followed by Finish. The Upgrade Device Driver wizard will start.
      5. Select Search for a suitable driver for my device and click Next
      6. Check Specify a location and click Next
      7. Input the location C:\IBMTOOLS\DRIVERS\SDIO and click OK
      8. Follow the instructions to complete the installation
2. To install the Secure Digital Storage Device driver, do the following:
   1. Insert the Secure Digital Storage Device into the SD card Slot. This will start the Found New Hardware wizard.
   2. Follow the instructions to install from the location of C:\IBMTOOLS\DRIVERS\SDIO and complete the installation.