| |
 |
Wireless LAN software - Dual-Band and ThinkPad 802.11abg for Windows 98 SE, NT 4.0 - ThinkPad R40, T40, T40p, T41, T42, X31, X40
|
|
This package provides the Wireless LAN driver and utility software for the following Wireless LAN adapters for Microsoft Windows 98 SE and NT 4.0.
- Dual-Band (802.11a/b) Wi-Fi Wireless Mini PCI Adapter.
- 11a/b/g Wireless LAN Mini PCI Adapter (Part number: 31P9701, 31P9702)
This release supports the following systems:
- ThinkPad R40
- ThinkPad T40, T41, T42
- ThinkPad X31
- ThinkPad X40*
Note: * Only Windows NT 4.0 is supported.
You may need to re-enter security information after updating the Wireless LAN driver. |
|
|
|
| Version: |
2.4.1.12 |
| Release Date: |
2004/05/12 |
|
|
| File link |
|
File size |
|
File description |
|
| 1qwc70ww.exe |
|
5,612,700 |
|
Dual-Band and 802.11a/b/g Wireless LAN Mini PCI Adapter Software for Windows
|
| 1qwc70ww.txt |
|
9,671 |
|
README for Dual-Band and 802.11a/b/g Wireless LAN Mini PCI Adapter Software for Windows
|
|
|
Note: For Microsoft Windows 2000 and XP, the driver for this package can be obtained here.
Summary of changes for version 2.4.1.12/1QWC70WW
- (New) Supports ThinkPad R40, T40, T41, T42, X31, X40
Note: Windows Management Instrumentation (WMI) is prerequisite. If your computer does not have WMI installed, go to http://www.microsoft.com and download the latest WMI and install it first.
- Start Windows 98SE.
- Extract this package to the hard disk drive.
- Click Start, then click Run.
- In the Open field, type C:\DRIVERS\WIN\WLLANPHL\SETUP.EXE and click OK to install the Wireless LAN software. If you extracted the files to a different location, specify that location instead.
- Follow the instructions on the screen.
- Restart the system.
Note: See the README file for unattended installation instructions.
Driver Installation
- Start Windows NT.
- Extract this package onto the hard disk drive.
- Click Start, point to Settings, then click Control Panel.
- Double-click the Network icon.
- If this is the first time to configure the Network, it will display a Network Configuration dialog box, then proceed to the next step. If not, go to step 15.
First Network Configuration:
- Click the Yes button.
- Select Wired to the network.
- Click the Next button.
- Click the Select from list... button.
- Click the Have Disk.. button.
- Type the path to the directory that contains the OEMSETUP.inf file in Insert Disk dialog box. The default location is C:\DRIVERS\WIN\WLLANPHL.
- Click the OK button.
- Select either Dual-Band Wi-Fi Wireless Mini-PCI Adapter or 11a/b/g Wireless LAN Mini PCI Adapter depending on which adapter is in your system.
- Go to step 23 below.
Add Ethernet to Network Configuration:
- Click the Adapters tab.
- Click the Add... button.
- Click the Have Disk.. Button
- Type the path to the directory that contains the OEMSETUP.inf file in Insert Disk dialog box. The default location is C:\DRIVERS\WIN\WLLANPHL.
- Click the OK button.
- Select either Dual-Band Wi-Fi Wireless Mini-PCI Adapter or 11a/b/g Wireless LAN Mini PCI Adapter depending on which adapter is in your system.
- Click the OK button.
- Click Close button.
- Follow the instructions displayed on the screen.
- Click Yes when prompted to restart the computer.
- Run the Setup.exe file and follow the instructions on the screen.
Wireless LAN Driver and Configuration Utility for Windows 98 and NT
- Double click wireless status icon in system tray and open Configuration Utility.
- Click the About tab.
|
|
| Applicable countries and regions |
| Worldwide |
|
|
| Document id: MIGR-55359 |
| Last modified: 2007-01-23 |
| Copyright © 2010 IBM Corporation |
|
|
|
|
|
|
|
|
