Summary of changes
	Installation instructions
	Determining which version is installed

Version 10.0.5

• (New) Initial release for ThinkPad R61(*1), R61e

Version 8.3.5

• (New) Initial release for ThinkPad R60, R60e, Z61e, Z61m, Z61t, Z61p

Version 8.1.4

• (New) Initial release for ThinkPad Z60t and R51e

Version 7.7.4

• (New) Initial release for ThinkPad T43 and T43p
• (New) Initial release for ThinkPad T43 (new Machine Type (M/T)) and R52 ThinkPad T43 new M/T: 1871/1872/1873/1874/1875/1876
• (New) Initial release for ThinkPad X41
• (New) Initial release for ThinkPad X41 Tablet
  
  

DOS driver for unattended installation:
For users who need to do unattended installation, DOS drivers are included in the following directories in this package. The DOS driver can be used only for this purpose.

• \NDIS2\DOS
• \Netware\ODI16

The OS/2 device driver is located in the following folder:

• \NDIS2\OS2

1. Double-click the OS/2 System icon on the desktop.
2. Double-click System Setup.
3. Double-click MPTS Network Adapters and Protocol Services.
4. Click Configure in Multi-Protocol Transport Services.
5. Confirm that LAN adapters and protocols is selected and click Configure.
6. Click Other adapters...
7. Type the full path name of the following folder and click OK.
   \NDIS2\OS2
   
8. Select Broadcom Ethernet in Network Adapters.
9. Click Change.
10. Click Yes in Change Network Adapter.
11. Click OK, click Close, then click Exit.
12. Confirm that Update CONFIG.SYS is selected and click Exit.
13. CONFIG.SYS Updated is displayed. Click OK.
14. Click Exit.
15. Reboot the system.
    
    

1. Double-click the OS/2 System icon on the desktop.
2. Double-click System Setup.
3. Double-click MPTS Network Adapters and Protocol Services.
4. Click Configure in Multi-Protocol Transport Services.
5. Confirm that LAN adapters and protocols is selected and click Configure.
6. Click Other adapters...
7. Type the full path name of the following folder and click OK.
   \NDIS2\OS2
   
8. Select Broadcom Ethernet in Network Adapters and click Add.
9. Add Protocols as required for your network.
10. Click OK, click Close, then click Exit.
11. Confirm that Update CONFIG.SYS is selected and click Exit.
12. CONFIG.SYS Updated is displayed. Click OK.
13. Click Exit.
14. Reboot the system.
    
    

Gigabit Ethernet:

To check the version of the device driver that is installed on your system, watch the sign on message such as the following when the device driver is loading.