Summary of changes
	Installation instructions
	Initializing the BIOS
	BIOS information
	Memory information

• (New) Support Windows Vista.
  

• Remove the Power-on password prior to updating the BIOS in RDM (Remote Deployment Manager) environment or similar environment.
• You need an AC adapter and a charged battery pack to update the BIOS.
• If a USB Diskette Drive is attached to your system, turn off the system and detach it before proceeding.

1. Print these instructions or display on another system.
2. Firmly connect the AC adapter to the system.
3. Start a supported version of Windows XP, 2000 and logon with administrative privileges on the target system.
4. Make the temporary directory on the hard drive (e.g. C:\Temp)
5. Download the ThinkPad BIOS Update Utility from the Web site and store the file into the temporary directory.
6. Click Start, then click Run...
7. In the Open dialog box, specify the utility filename with the full path name where you stored ThinkPad BIOS Update Utility (e.g. C:\Temp\74UJ15US.EXE) and then press the Enter key.
   Note: For unattended update, specify the file name with options "-s -a -s". (e.g. C:\Temp\74UJ15US.EXE -s -a -s) The BIOS is updated without any user interaction.
8. Follow the instructions on the screen.
   Depending on the operating system configuration, restarting the operating system and rerunning this BIOS update utility may be required. In this case, the following message will appear on the screen. "DeviceIoControl() returns 2 Please restart your operating system and execute the BIOS or Embedded Controller update utility again."
   Windows will shut down automatically and ThinkPad BIOS Update Utility screen appears.
9. Select Read this first from the menu and carefully read the information that appears.
10. Press the Esc key to return to the menu.
11. Select Update system program and follow the instruction on the screen.
    
    Attention: Do not turn off or suspend the system until the update has been completed. If you turn off or suspend the system while the update is still in progress, the system board may have to be replaced.
    
    After the update has been completed, the system is automatically turned off.
    Do the following to make sure the BIOS is updated correctly.
    
    
12. Turn on the system.
13. While the "To interrupt normal startup, press the blue Access IBM button" message is displayed at the lower-left of the screen, press the Access IBM button.
14. Select Start setup utility. If you have set a supervisor password, the BIOS Setup Utility menu appears after you type in the password.
15. Verify the BIOS version and date.
16. Turn off the system.
    
    

1. Turn off the system.
2. Turn on the system.
3. While the To interrupt normal startup, press the blue Access IBM button message is displayed at the lower-left area of the screen, press the Access IBM button.
4. Double-click Start setup utility. The BIOS Setup Utility menu will be displayed. If you have set a supervisor password, the BIOS Setup Utility menu appears after you enters the password.
5. Press the F9 key to load default configuration.
6. Select Yes.
7. Press the F10 key to save default configuration and exit.
8. Select Yes.

Notes:

• After initialization you may need to reapply some settings that you had changed previously.
• After the initialization has been completed, the system restarts automatically.
  
  

1. Turn on the system.
2. While the To interrupt normal startup, press the blue Access IBM button message is displayed at the lower-left of the screen, press the Access IBM button.
3. Select Start setup utility. If you have set a supervisor password, the BIOS Setup Utility menu appears after you type in the password. The BIOS version and date are displayed on the first screen of the BIOS Setup Utility.
4. Check BIOS Version and Embedded Controller Version.
5. Turn off the system.
   
   

• C0000-CFFFF : Reserved for Video BIOS
• D0000-D3FFF : Reserved for Option ROM of Ethernet (*1)
• DC000-DFFFF : Reserved for USB BIOS (*2)
• E0000-FFFFF : Reserved for System BIOS
  
  Notes:

• (*1) This area becomes free by disabling the Internal Network Option ROM option under Config and Network in BIOS Setup Utility
• (*2) This area becomes free by disabling the USB BIOS Support option under Config and USB in BIOS Setup Utility.
  
  

• D4000-DBFFF

But certain addresses in this area will be reserved for CardBus Controllers or others by Operating Systems. The addresses vary and depend on the design of each Operating System.