Click here for instructions and limitations on downloading and creating the diskette.

This Additional Information field contains the following sections
I. Summary of changes
II. Installation instructions
III. Determining which version is installed

I. Summary of changes
version 1.00
-(New) TI1450 Support
-(New) Port Replicator support
version 1.01
- (New) TI1420 Support
version 1.02
-(New) LCD Color Profile Support
-(New) Support for ThinkPad i Series 1157
version 1.03
-(New) APM support after 1999/12/31 BIOS date.

II. Installation instructions
NOTE: The following instructions apply to both Windows 98 Gold (version 4.10.1998) and to Windows 98 Second Edition (version 4.10.2222A) .

1. Extract this package to a floppy diskette.
2. Copy all the cabinet files and installation programs in Windows 98 CD-ROM to your hard disk drive (HDD) as follows.

3. 1. Make a temporary directory ( for instance, C:\WIN98) and make sure enough HDD space is available to store the cabinet files and installation programs (the required free space varies depending on the language of Windows 98).
      
   2. At a prompt, type COPY src_cd :\WIN98\*.* tgt_drv:\tgt_dir and then press Enter. Where src_cd is the drive letter of CD-ROM drive (e.g. D, E,..) and tgt_drv:\tgt_dir is the drive letter and temporary directory made in step 1.a (e.g. C:\WIN98).
      
      
4. Insert the supplemental file diskette in the diskette drive and copy the updated INF files to the temporary directory as follows:

4. Use the following commands to start the installation from the temporary directory:
   

5. Refer to the Windows 98 documentation and instructions on the screen to complete the installation.
   
6. Use the following instructions to apply APM2APM.reg information to Windows 98:
   
   1. Boot the system to the Windows 98 desktop.
   2. Insert the Windows 98 supplemental file diskette.
      
   3. Click Start and then click Run.
      
   4. Type A:\APM2APM\APM2APM.reg and click the OK button. The following Registry Editor's windows will appear: "Are you sure you want to add the information A:\apm2apm\apm2apm.reg to the registry?"
      
   5. Click Yes . A successful windows message will be displayed.
      
   6. Cick OK to exit the registry editor screen.

The following steps only apply to Windows 98 Second Edition (98SE):
Use the following instructions to apply the LCD Color Profile to Windows 98SE

1. Start Windows 98SE.
   
2. Click Start, select Settings, and then click Control Panel.
   
3. Double-click the Display icon.
   
4. Click the Settings tab.
   
5. Click the Advanced button.
   
6. Click the Monitor tab.
   
7. Click the Change button.
   
8. Click the Have Disk button.
   
9. Specify the directory where ibm_tp.inf and IBM_tp.icm files exist (under A:\) and click OK.
   
10. Select IBM_tp.inf and click OK.
    
11. From the list of resolutions, select the resolution for your system.
    
12. Click Apply.
    
13. Select Color Management tab to make sure IBM_tp.icm file is loaded.

III. How to determine what version is installed
This Package has following files.

Windows 98