Click here for instructions and limitations on downloading and creating the diskette.

This Additional Information field contains the following sections
I. Summary of changes
II. Installation instructions
III. BIOS information with links to previous BIOS releases

I. Summary of changes
version 1.11 - R01-A7E

• (New) Support for Microsoft Windows Me.

Click here for a complete list of changes fixed by this BIOS update.


II. Installation instructions
Note: You need an AC adapter and a charged battery pack to update the system program.

1. Print these instructions or display them on another computer.
   
2. Firmly connect the AC adapter to the computer.
   
3. Insert the System Program Service Diskette into the diskette drive and power on the computer.
   
4. When prompted press the 1 key to update the system program.
   
   Attention: Do not turn off the computer until the update has been completed. If you turn off the computer while the update is still in progress, the system board may have to be replaced.

After the BIOS update, perform these steps to make the changes effective:

1. Power on the computer, and then press and hold the F1 key until the BIOS Utility menu appears.
   
2. If the computer presents a password prompt type in the correct password.
   
3. Select Load Default Settings and then press Enter.
   
4. Select Yes and then press Enter.
   
5. Press Esc, then select Yes. Press Enter to restart computer.

III. BIOS information with links to previous BIOS releases