• (Fix) After updating the BIOS to v1.39, the system may fail to recognize the actual system memory size of a certain memory card.

• (Fix) System may hang with a certain memory card.

• Corrects an issue with applications that use the Int 13 API call not getting the correct hard disk drive (HDD) information. This can occur if the Startup Boot device order in the IBM BIOS Setup Utility is changed from the first hard disk drive booting first to the second HDD booting first.

Version 1CETE7WW (1.37)

• (Fix) System freezes when Card bus card ( ex. CISCO AIR-CB20A ) is inserted.
• (Fix) Can not boot from USB FDD attached to an external USB hub.
• (Fix) PC-Doctor for DOS may return the wrong battery type.

Version 1CETE6WW (1.36)

• (Fix) When Wake on LAN (WoL) is enabled in BIOS setup, the system does not follow the "Network" boot sequence but follows the normal "Boot" sequence.
• (Fix) The floppy disk drive (FDD) icon may not appear in "My Computer".
• (Fix) The BIOS will not keep the settings of disabling network devices.
• (Fix) The USB Microsoft IntelliMouse Optical may not work when attached to the port replicator.

Version 1CETE2WW (1.32)

• (Fix) After updating the BIOS, POST 175 error appear at power on.
  Note: This problem happens only on version 1.31 (1CETE1WW)

Version 1CETE1WW (1.31)

• (Fix) MEM command only returns 16 MB(XMS) available in a PC DOS enviroment.
• (Fix) Trackpoint is disabled after power on when docked to a port replicator and the lid closed.
• (Fix) The system does not wake up after entering standby mode without AC adaptor.
• (Fix) The system wakes up from standby even when the wake up function is disabled.
• (Fix) Secondary IDE(master) drive automatically enables PIO mode after standby/resume twice.
• (Fix) Improved POST process to prevent POST 189 error.
• (Fix) Changed default setting in BIOS setup of "Legacy Floppy Drives" to Enabled.
• (Fix) Update Intel Boot Agent to version 4.0.22.

Version 1CETD8WW (1.28)

• (Fix) The system may hang if the LID is closed or the Fn key is pressed while the system is trying to enter standby mode.
• (Fix) Abnormal display on some 13.3' LCD in Windows XP.

Version 1CETD7WW (1.27)

• (Fix) The system may hang during the unattended install of Microsoft Windows 2000 from a networked drive when using the onboard ethernet.

Version 1CETD6WW (1.26)

• (Fix) Windows Power Meter may not show the correct charging status.
• (Fix) Improve memory control timing for 256/512MB DIMM.
• (Fix) The system may hang up or has red screen (ACPI Critical Error #4006) at booting of Microsoft Windows 98 at low temperature.

Version 1CETD3WW (1.23)

• (Fix) The system may become unstable or hung after resuming from suspend.

Version 1CETD0WW (1.20)

• (New) Support for Microsoft Windows NT.
• (Fix) Cannot enter Power-on, Supervisor, or HD password using a Microsoft Natural Keyboard Pro (with USB interface).

Version 1CETB5WW (1.13)

• (Fix) If any of below device is installed, the device will not work after resume from standby.
  • ThinkPad Ultrabay Plus Numeric Keypad
  • ThinkPad Ultrabay Plus Cradle for the WorkPad c500 Series

Version 1CETB4WW (1.12)

• (New) Microsoft Windows XP Support.

Version 1CET60WW (1.01)

• (Fix) Fix for the system unstableness after restarting from Microsoft Windows.

Version 1CET59WW (1.00)

• (Fix) Fix for the white blank screen appearing on 13 inch LCD systems in some conditions.

Version 1CET58WW (0.99)

• (New) Support for ThinkPad R30.
  
  

• ThinkPad R30