Symptoms
Symptoms corrected by version 1.00 - inet20ww

• (New) Following display adapter support added.
  • Colorgraphic Evolution 4
  • Matrox Productiva G100
  • Matrox Millennium G200 SD
    NOTE: If you plan on using the TV-out function in Microsoft Windows 95 or Microsoft Windows 98, it is required that the BIOS be updated to level inet20ww or later and the video driver be updated to version 2.05.06Q or later. Click here to obtain the latest Video driver.

Symptom corrected by version 1.01 - inet21ww

• (New) Support for Microsoft Windows 2000 Professional Beta-3 Release

Symptoms corrected by version 1.02 - inet22ww

• (New) Change the default suspend timer value for High Performance mode from 60 minutes to zero
• (Fix) When resuming from suspend/hibernation, cancel NumLock while entering the Power on Password.

Symptom corrected by version 1.03 - inet24ww

• (Fix) It may take the system a long time to resume from hibernation.

Symptoms corrected by version 1.04 - BIOS: inet24ww, slave controller: IHHT08WW

• (Fix) Battery charging parameters changed to optimize battery function.
  This release is for updating the slave controller program to version 1.08, 07/16/99 - IHHT08WW. The version 1.04 diskette contains same version of BIOS as the version 1.03 diskette. If your system is already at BIOS level INET24WW, the update process will skip the BIOS update and begin updating slave controller.
  NOTE: The slave controller manages the Power Management functions of the system.
  

Symptoms corrected by version 1.05 - inet25ww

• (New) Support for Microsoft Windows 2000 RC2 Release
• (Fix) Support for Adaptec AHA2940U2W
• (Fix) When the power on password is installed, the mouse pointer will disappear in Windows 98 after the system resumes by timer or an in-coming modem call.
• (Fix) The LCD screen is out of synchronization in 400x300 video mode when screen expansion is enabled.

Symptoms corrected by version 1.06 - inet26ww

• (New) Support has been added for the 256 MB memory dimm.
• (Fix) Support for ATI Technologies XPERT98.
• (Fix) The system should no longer experience an InfraRed configuration problem.
• (Fix) A microcode program was updated to fix a suspend/resume problem.
• (Fix) The system now forces UltraDMA mode for Docking IDE to UltraDMA mode2.

Symptoms corrected by version 1.08 - inet28ww

• (New) Support for Microsoft Windows 2000

Symptoms corrected by version 1.09 - INET29WW

• (Fix) After installing USB or other device drivers in Windows 95 OSR2.1, the system will hang while rebooting.
• (Fix) After updating the BIOS, Linux will not boot or can not be installed properly.

Symptoms corrected by version 1.10 - INET30WW

• (Fix) POST error 188 system board errors can occur if a suspend then resume occurs during boot load of the UMS application.
• (Fix) The system does not resume from standby mode when a PCI video card is installed in a SelectaDock.

Symptom corrected by version 1.11 - INET31WW

• (Fix) Fixes hibernation file so that the system can boot if the hard disk drive root directory has no free space.

Symptom corrected by version 1.12 - INET32WW

• Version control

Symptom corrected by version 1.13 - INET33WW

• Version control

Symptom corrected by version 1.14 - INET34WW

• Version control

Symptom corrected by version 1.15 - INET35WW

• (Fix)Linux system fails with memory detection. Linux operating system only.

Symptom corrected by version 1.16 - INET36WW

• (New) Microsoft Windows XP Support
• (Fix) Operating system installation failure with CD-ROM boot

Affected configurations
This BIOS Update information only applies to the following model and type numbers.

• ThinkPad 600E:
  2645 - 3xx, 4xx, 5Ax, 5Bx, 5Jx, 8xx, AAU, ABU, ALx, AMx, BAU, Cxx, Dxx, Exx, Fxx, Gxx, Ixx, JJ3, Mxx, Nxx, Pxx, RP1, RRx (except for RRA), Sxx, Uxx
  2646 - All models
  

Solution
Click here to download the latest BIOS update diskette.