|
Symptoms
Symptom corrected by version 1.00 - imet39ww
- (Fix) When using the modem while connected to a 570 UltraBase in battery mode, the system may hang.
Symptoms corrected by version 1.00a - imet40ww
- (Fix) System halt occurs when using certain pair of PC-cards simultaneously while attached to the UltraBase.
Symptom corrected by version 1.01 - imet41ww
- (Fix) System halt occurs when using certain pair of PC-cards simultaneously while attached to the UltraBase.
- (Fix) Password prompt not displayed when CMOS data corrupted.
Symptoms corrected by version 1.02 - imet43ww
- (Fix) PCMCIA card in the Port Replicator with Advanced EtherJet Feature does not work after Hot docking or warm docking
- (Fix) Power Mode changes made by pressing Fn+F11 are not saved after shutting down or restarting the system
- (Fix) Remote IPL does not work with IBM Auto 16/4 Credit Card Adapter
- (Fix) Enhancement to the Power on Password Function
- (Fix) When the Fn+F3 key is pressed twice, the LCD does not reactivate after pressing any key
- (Fix) Booting from the Ethernet in Port Replicator does not work after reboot
- (Fix) Unnecessary message, Error 280, Previous Boot Fail, appears when system is powered off during POST
Symptoms corrected by version 1.03 - imet45ww
- (Fix) CardBus cards are not detected during Power on or after Suspend/Resume
- (Fix) UMA reports the temperature alert at invalid temperature
- (Fix) After Hot/warm docking, system will hang during reboot
- (Fix) System will hang after resuming from hibernation mode if the system was hibernated while the password prompt was displayed
- (Fix) Password Prompt ICON is sometime is broken at RI resume
Symptoms corrected by version 1.05 - imet49ww, imht08ww
- (New) Improve the suspend inhibit feature when PCMCIA card is inserted.
- (New) Improve ACPI function
- (New) Change the FnKey volume beep tone; tone will be softer.
- (New) Accelerate the Fnkey Typamatic rate.
- (Fix) EEPROM error -188,189- can appear when the system is powered off during POST. (very rare)
- (Fix) If Wake on LAN (WOL) is disabled, the system still wakes up via the network if AC is disconnected.
- (Fix) If LCD off timer expires while resume password prompt is displayed, the LCD can not be resumed. This problem occurs only on Microsoft Windows 98.
- (Fix) "Hibernation after Suspend" function does not work if Supervisor Password (SVP) or Hard drive Password ( HDP) is installed.
- (Fix) You are not prompted for Power On Password (POP) immediately after creating a hibernation file.
- (Fix) Hibernation wakeup can fail just after a hibernation file is created when SVP or HDP is installed.
- (Fix) Change the error message when the system is undocked while suspended.
- (Fix) Battery charging parameters were changed to optimize battery function.
Symptoms corrected by version 1.06 - imet52ww
- (Fix) Microsoft Windows 95/98 will sometimes boot into safe mode.
- (Fix) Systems loaded with Microsoft Windows NT may not suspend while in AC mode.
Symptoms corrected by version 1.07 - imet54ww
- (New) In the BIOS setup screen, the <+> and <-> control key assignments have been changed to the <F6> and <F5> keys, respectively.
- (Fix) In Windows NT, without the system driver, CardBus cards in a docking slot do not work.
- (Fix) If the numlock function of an external keyboard or keypad is enabled, the numlock of the internal keyboard is forced to the enable state also.
- (Fix) In Windows 98, the LCD off timer and the HDD off timer do not execute at the correct time.
- (Fix) Hibernation does not work with Windows 98 Second Edition
- (Fix) PC card in a docking slot does not work after hibernation wakeup under WIN95 OSR2
- (Fix) RPL does not work with the Auto 16/4 token ring credit Card adapter
- (Fix) Resuming from the hibernation timer in Windows NT will cause the system to hang.
- (Fix) System does not resume when receiving an incoming call through a PCMCIA modem card.
Symptoms corrected by version 1.09 - imet56ww
- (Fix) Video BIOS update to 1.15.19. (No function update)
- (Fix) WINNT remote installation support (Legacy modem resource support)
- (Fix) System boot long time when DVD is attached
- (Fix) Even if critical low battery case, system boot or wakeup from Hibernation
- (Fix) In Windows 98, the LCD off timer and the HDD off timer do not execute at the correct time after power mode change.
Symptoms corrected by version 1.10 - imet58ww
- (New) Microsoft Windows 2000 support
- (Fix) Windows 2000 remote install support
Symptoms corrected by version 1.11 - imet59ww
- (Fix) Video BIOS was updated to 1.15.22. (No function update)
- (Fix) Hibernation fails when there is over 80 Mbyte memory.
- (Fix) After waking up from hibernation, the LCD is white
- (Fix) UUID can not be read after the system rebooted.
- (Fix) On Windows 98, LCD off timer does not work correctly when the power mode is changed by the Thinkpad Configuration Utility.
Symptoms corrected by version 1.12 - imet60ww
- (Fix) After repartitioning the hard disk, Hibernation will fail
- (Fix) After resuming from suspend mode, the system will hang
Symptoms corrected by version 1.14 - imet62ww
- (New) Microsoft Windows Me support
- (Fix) Mute could not work correctly.
Symptoms corrected by version 1.15 - imet64ww
- (Fix) In Windows 2000, LCD/CRT is switched with IDT mode by Fn and F7 keys.
Symptoms corrected by version 1.16 - imet65ww
- (New) Microsoft Windows XP support
- (Fix) In Windows XP, the system speed slow down in battery mode.
- (Fix) Some 3.3V PC cards may not work.
Affected configurations
Any ThinkPad 570 system
Solution
Click here to download the latest BIOS update diskette.
|