|
At a glance
The new 40GB 7200 rpm ATA/100 hard drive offers an upgrade selected from the highest-quality hard drives available. Features include:
- 40,000 MB formatted capacity
- 4.2 ms average latency
- 8.7 ms typical average read seek time
- 2 MB adaptive buffer (5)
- Sustained data rates of 20 to 35 MBps
- 20GB per disk platter data recording density
Warranty
3 year Limited - customer carry-in exchange
Packaging
You will receive one box containing the following items:
- 40GB 7200 rpm ATA/100 (EIDE) hard drive
- Screw
- User's Guide and User's Guide Supplement
- Ontrack Disk Manager DiskGo! installation software
Product marketing and replacement part numbers (FRU)
Worldwide
- Description: 40GB 7200RPM ATA/100 Hard drive
- Marketing part number: 22P7157
- Replacement part number: 19K1568
Product dates
Worldwide
- Announce date: 22 May 2001
- Planned availability date: 01 Jun 2001
Technical specifications
Performance specifications as known at time of announcement
- Formatted capacity: 40GB
- Rotational speed: 7200 rpm
- Average latency: 4.2 ms
- Typical average read seek time: 8.7 ms
- Data buffer (adaptive segmented): 2 MB(2)
- Interface performance: Ultra ATA/100
- Burst transfer rate (maximum): 100 MB/sec
- Sustained data transfer rate: 20 to 35 MBps
(1) Actual performance varies based on many factors and is often less than the maximum possible.
(2) Up to 384 KB reserved for drive firmware.
NOTE: The total user-accessible capacity can vary slightly based on operating system environments.
Physical, environmental, and compatibility specifications as known at time of announcement
Weight
Height
Width
Depth
NOTE: All weights and measurements are approximate.
Operating temperature
- Between 5 degrees celsius and 85 degrees celsius
- Between 41 degrees fahrenheit and 131 degrees fahrenheit
Relative humidity
- Operating: between 5% and 85% (non-condensing)
NOTE: To achieve the drive's potential high-reliability level, the system should provide sufficient air movement to maintain the drive surface temperature below 60 deg C.
Agency approvals
- UL
- CSA
- TUV
- IEC
- C-Tick
- CE Mark
- BSMI
Hardware requirements
The 40GB 7200RPM ATA/100 (EIDE) HDD is supported on the following systems:
|
System
|
Machine Type |
Model |
|
Aptiva
|
2158, 2163, 2164, 2165, 2170, 2171, 2172, 2173, 2174, 2187, 2188, 2193, 2194, 2196, 2197, 2198, 2199, 2274, 2284, 2178 |
All |
|
PC 300
|
6344, 6345 |
All |
|
PC 300GL
|
6263, 6265, 6267, 6268, 6275, 6277, 6278, 6285, 6287, 6288, 6338, 6561, 6563, 6564, 6574, 6591, 6593 |
All |
|
PC 300PL
|
6562, 6565, 6566, 6584, 6592, 6594, 6595, 6862, 6872, 6892 |
All |
|
PC 300XL
|
6588 |
All |
|
NetVista A20
|
6269*, 6270* |
All |
|
NetVista A40i
|
2251*, 2271 |
All |
|
NetVista A40/p
|
6058*, 6059*, 6568, 6569, 6578*, 6579*, 6648, 6649, 6830*, 6831*, 6840, 6841 |
All |
|
NetVista A60
|
6833, 6838 |
All |
|
NetVista A60i
|
6832, 6848 |
All |
|
IntelliStation E Pro
|
6836, 6846, 6867, 6893 |
All |
|
IntelliStation M Pro
|
6849, 6868, 6889 |
All |
|
Netfinity 1000 IDE
|
8477 |
All |
|
eServer xSeries 200
|
8478 |
All |
* These systems can only accommodate a 7200RPM option drive if the standard drive already in the system is also 7200RPM.
Software requirements
- MS-DOS 6.22
- PC DOS 7.0
- PC DOS 2000
- Microsoft Windows 3.1
- Windows 95 A version
- Windows 95 B version
- Windows 2000
- Windows NT 4.0
- Windows 98
- Windows Me
- OS/2 4.0
- NetWare 4.x
- Linux
Compatibility
This HDD adheres to the ATA/ATAPI-4 (X3T13/D1153, Revision 17) American National Standards Institute (ANSI) standard.
NOTE: Some configurations may not be compatible.
Limitations
NOTE: Some configurations may not be supported.
Other
Installation time
Approximately 30 minutes.
|
