Lenovo™
Skip to main content
Country / region  (Select)     English (Change)
 
     Home      Products      Support & downloads      My account      About Lenovo
 
How to use the function (Fn) keys on the keyboard - ThinkPad G40, G41
Applicable countries and regions

The following table shows what each function key (Fn) key on your keyboard is for and how to use them.

Note:

  • The Fn key works independently of the operating system.

Key combination Description
Fn + F1 Reserved.
Fn + F2 Reserved.
Fn + F3 Turn off the LCD display, leaving the screen blank. To turn the LCD display on again, press any key or the TrackPoint pointing stick.
Fn + F4

Put the computer in standby mode. To return to normal operation, press the Fn key independently, without pressing a function key.

Note:

  • The setting can be changed so that pressing it puts the computer into hibernation mode or even shuts the computer down.
Fn + F5

Open the Wireless Radio Control screen.

Note:

  • This function is supported only in Micrososft Windows 2000, and Micrososft Windows XP.To use this function, the PM device driver must be installed on the computer. Micrososft Windows 98 supports 802.11 Wireless Radio power control only.
Fn + F6 Reserved.
Fn + F7

Switching the display output location.
Switch between the computer display and an external monitor (CRT). If an external monitor is attached, the computer output is displayed in the following three patterns by turns:

  • External monitor (CRT display)
  • Computer display and external monitor (LCD + CRT display)
  • Computer display (LCD)

Note:

  • In Windows XP and Windows 2000, this setting can be changed so that pressing it starts a presentation scheme directly with no need to start Presentation Director.
Fn + F9

Open the EasyEject Utility screen.


Note
:

  • This function is supported only in Windows 2000 and Windows XP.
Fn + F10 Reserved.
Fn + F11 Reserved.
Fn + F12

Put the computer into hibernation mode. To return to normal operation, press the power button for less than four seconds.

Note:

  • To use Fn+F12 for hibernation, the PM device driver must be installed on the computer.
Fn + Home The computer display becomes brighter.
Fn + End The computer display becomes less bright.
Fn + Spacebar

Enable the FullScreen Magnifier function.

 

Applicable countries and regions
Worldwide

Back to top

Document id:  MIGR-50568
Last modified:  2005-08-10
Copyright © 2009 IBM Corporation
Copyright © Lenovo 2009, all rights reserved
 
Document options
Printable version 
Warranty Upgrade
warranty_upgrade

Act Now


Lenovo Forums

Get help at Lenovo Forums


Lenovo RSS Feeds

rss_icon.gif

Subscribe to downloads and drivers updates


Take our survey
http://www.lenovo.com/i/v15/icons/cvm_plus.gif Help us improve your visit

Printable version



    Terms of use Privacy Contact