Movie player help

Note: Please read the document Installing the palm rest, important additional information before you begin.

Keyboard removal movie

1. To install the keyboard:
   1. Position the keyboard over the system.
   2. Connect the cable to the system board.
   3. Seat the keyboard in the bezel.
   4. Close the cover and turn the system over.
   5. Secure with the single screw.
   6. Turn the system over
2. To install the palm rest:
   1. Position the palm rest over the base and connect the finger print reader UltraNav pad cable.
   2. Align the palm rest with the base and press down to seat the latching tabs.
   3. Turn the system over.
   4. Secure with the four screws on the bottom.
3. Install the Battery Pack:
   1. Position the battery pack into the machine using the side rails as a guide.
   2. Push in the battery pack until it is secured by the latch.
   3. Slide the latch to the lock position.

ThinkPad movie index

Detailed installation and removal instructions

Full service video CD available from http://www.pc.ibm.com/training.