Movie player help

Modem daughter card removal movie

1. Install the modem daughter card:
   1. Connect the modem cable to the card.
   2. Position the card on the connector, using the screw holes for alignment.
   3. Secure with the two screws.
2. Install the upper cover:
   1. Position the top cover over the base and depress along the edges to seat the latching tabs.
   2. Connect the fingerprint reader cable to the ZIF connector on the system board.
   3. Turn the system over.
   4. Install the six screws.
   5. Turn the system over and open the cover.
3. Install the keyboard
   1. Position the keyboard over the palm rest and connect the keyboard cable to the system board.
   2. Align the top edge of the keyboard with the bezel, and seat the keyboard.
   3. Close the cover, and then turn the ThinkPad over.
   4. Secure the keyboard with the four screws.
4. Install the battery pack:
5. 1. Position the battery pack into the machine, using the side rails as a guide.
   2. Slide it in until secured by latch two, and then lock latch one.

ThinkPad movie index

Detailed installation and removal instructions

Full service video CD available from http://www.pc.ibm.com/training.