Publications

At a glance

The ZIP 100MB IDE Internal Drive offers the capability of storing 100MB of data on a removable data diskette. It can be used in combination with, or in place of, the 1.44MB diskette drive that is currently installed in commercial desktop computer systems.

The ZIP 100MB IDE Internal Drive:

• Provides the standard IDE configuration options of connection as a master or slave device
• Supports automatic configuration when installed in host systems provided with a Cable Select ATA interface cable
• Supports 16-bit data transfers, allowing high data transfer rates of up to 1.4MB/sec

The ZIP 100MB IDE Internal Drive automatically certifies the removable data disk media during the formatting process by providing information such as:

• Specific disk configurations
• Diagnostic results
• Logical block information

The drive can be operated in either a horizontal or vertical position and can function in locations where space is at a premium, necessitating non-standard device orientation. It uses a power down sleep mode to reduce unnecessary electrical power drain. It can also be configured to function as the Drive A: diskette drive for the system, providing the capability for system boot up from the drive.

Warranty
1 year Limited - customer carry-in exchange

This product replaced by
The ZIP 100MB IDE internal drive is replaced by the ZIP 250MB internal drive (marketing part number 00N8078).

Packaging
One box containing

• ZIP 100MB IDE Internal Drive
• IDE 2 drop cable
• Accessory Kit
• Tower Chassis Bezel
• Desktop Chassis Bezel
• Publication Group

Marketing and FRU part numbers
Worldwide

• Marketing part number: 20L0544
• FRU part number: 28L1605

Additional part numbers
Part number(s) for ordering multiple quantities
None

Associated FRU part number(s)

• IDE Cable
• FRU part number: 12J3432
• Asia Pacific, Canada, Latin America, United States

• Tower Bezel
• FRU part number: 12J4498
• Asia Pacific, Canada, Latin America, United States

• Desktop Bezel
• FRU part number: 03K8697
• Asia Pacific, Canada, Latin America, United States

Product dates
Worldwide

• Announce date: 24 Aug 1998
• Planned availability date: 2 Oct 1998
• Withdrawal date: 16 Oct 2001
• Effective withdrawal date: 16 Nov 2001

Technical specifications
Performance specifications as known at time of announcement

Average latency (average rotational delay)
10.2 msec

Data rates

• Sustained: up to 11.2Mbits/sec
• Burst: up to 88.9Mbits/sec

Seek time

• Minimum: 4 msec
• Average: 29 msec
• Maximum: 55 msec

Spindle speed
2942 rpm

Storage capacity
100MB

Power requirements

• 5vdc +/- 5%
• Maximum Continuous: 800 mA rms
• Peak: 1.65 Amps
• Sleep: 0.07 Amps
• +5vdc Maximum Ripple, 1Hz to 20Mhz: 100 mV P-P

Power dissipation

• Maximum Continuous: 4.00 Watts
• Sleep: 0.35 Watts

Cartridge insertion/removal cycles
2 K minimum

Drive insertion/removal cycles
10 K minimum

Non-recoverable errors
<10 in 10X13 bits

MTBF (mean time between failures)
100 K hours

Service life
5 Years

Physical, environmental, and compatibility specifications as known at time of announcement

Height

• 1.00 inches
• 25.4 mm

Width

• 3.99 inches
• 101.4 mm

Depth

• 6.44 inches
• 163.6 mm

Operating temperature

• low of 10 degrees Celsius to a high of 51 degrees Celsius
• low of 50 degrees Fahrenheit to a high of 124 degrees Fahrenheit

Relative operating humidity
low of 20% to a high of 80% (non-condensing)

Agency approvals

• UL/cUL
• TUV
• CSA
• CE Mark
• C-Tick

Hardware requirements
The Zip 100MB IDE Internal Drive is supported on all models of the following IBM platforms: 6589, 6272, 6282, 6284, 6275, 6285, 6561, 6591, 6588, 6577, 6587, 6562, 6592, 6862, 6892

Supported operating systems

• OS/2 V3.x and V4.0
• Microsoft Windows 3.1
• Windows 95
• Windows 98
• Windows NT V4.0

Limitations
Operation as bootable drive A: is possible only when the following conditions pertain:

• Host must be operating under Windows 95 OSR2, or later
• Host must be operating under Windows NT 4.0 Service Pack 3, or later (Microsoft Hot Fix, Art. Q154094 must be applied for operation with Service Pack 3)

Additionally, the host BIOS must include specific Drive A support for the ZIP ATAPI drive. Contact the BIOS vendor for this information. Some configurations may not be compatible.

Other
Tthe Zip Tools, v.IM5600, packaged with the IBM Zip100 Drive is Year 2000 compliant. The tools that are available from IOMEGA are NOT Year 2000 Compliant. For this reason it is recommended to use the Tools provided with the Zip100 Option.

Document Note(s)

1. The symbol * is used to denote that the information is currently unavailable for this product.
2. All dates are represented in the US English format of mm/dd/yyyy (where mm=month, dd=day, yyyy=year).
3. FRU stands for Field Replacement Unit. It is the part number used for ordering service/replacement parts.
4. Effective Withdrawal means that on the given date the products will be withdrawn from marketing. After that date, the product can not be obtained directly.