Files

General information
The PCI Digital TFT 2D/3D P&D -D Graphics Accelerator Adapter addresses high performance 2D/3D and value 3D requirements. This adapter features 8MB of video memory standard. An upgrade of an additional 8MB of memory is available from Matrox for a maximum video memory configuration of 16MB. Adding extra memory increases video performance and also allows for more 3D resolutions. Businesses that need high-performance graphics, improved video resolution, and vibrant color quality can benefit from this adapters. This adapter is designed to complement leading-edge P&D digital monitors such as the T55D (1024 x 768) Digital Monitor and the T85D (1280 x 1024) Digital Monitor.

Improve your system's video performance with the PCI/AGP Digital TFT 2D/3D P&D -D Graphics Accelerator Adapter. Features include:

• Double and triple buffer for smooth animation
• 66 MHz accelerated graphics port (AGP) and 2x system bus interface with sideband address support for AGP model
• 128-bit DualBus internal data bus on the video chip
• VESA Plug and Display (P&D) Video Port: Digital TMDS Port will support up to VESA SXGA (1280 x 1024) 60 Hz
• Multiple combinations (up to four) of P&D with T55D and T85D Flat Panel Monitors can operate in system units with suitable operating systems.

• Card
• Publication
• Device Driver diskettes for Windows 9X and NT 4.0

• VESA Plug and Display Video Port (P&D-D) Digital (TMDS) Output, DD2B, Hot Plugging Detection with suitable operating system support
• Digital TMDS Port supports up to VESA SXGA (1280 x 1024) 60 Hz
• Up to 10-meter cable length from system unit to monitor with suitable interface cable
• Completely integrated video subsystem on a chip including 2D/3D and a video port
• 64-bit, 125 MHz SDRAM interface
• 128-bit DualBus internal data bus on the video chip
• 3D engine that is OpenGL ICD and Direct 3D optimized with the following hardware features:
• 3D floating-point setup engine
• True alpha blending
• Specular highlighting
• Vertex and table fogging
• Double and triple buffer for smooth animations
• Optional 16- or 32-bit Z buffer for accurate depth rendering
• Gouraud lighting for accurate lighting
• Full scene initializing
• Texturing: per-pixel trilinear filtered, perspective corrected, video textures, compression (CLUT4, CLUT8) on-chip texture cache
• Color dither for crisp colors with a small amount of memory
• Zooming
• Video processor that includes the following hardware features:
  • Vibrant Color Quality (VCQ) rendering using 32bpp color accuracy
  • Color space conversion (YUV to RGBxx)
  • Hardware scaling with X and Y interpolation for high-quality
  • video playback
  • Chroma keying
  • Graphics overlay support for fast performance
  • Support for MPEG 1, video in/out, and TV tuner hardware upgrades
• 250 MHz, 64-bit external RAMDAC, which supports up to 75Hz refresh rate at 1600 x 1200
• FLASHable video BIOS that can be upgraded by diskette
• PC 98, AGP 1.0, VESA VBE V2.0, DDC2B-compliant
• Advanced power management support (DPMS)
• Complete plug and play support
• Multiple combinations (up to four) of P&D A/D with T55D and T85D and CRT Monitors can operate in a system unit with a suitable operating system
• Attachment of Matrox 8 MB SDRAM Memory Option from Matrox
• Attachment of additional video interface devices by the Industry Standard Video Interface Port (VIP)
• ISO 9241 Part 3 and 8 Capability for improved quality and ergonomics with suitable Monitor, System Unit, Operating System, and Keyboard.
• Display modes via 15 way D Shell Connector

• low of 10 degrees Celsius to a high of 35 degrees Celsius
• low of 50 degrees Fahrenheit to a high of 63 degrees Fahrenheit

• CE
• C-Tick
• VCCI

Note: FCC Certified via Doc Process

Hardware requirements
The PCI Digital TFT 2D/3D P&D -D Graphics Accelerator Adapter is supported on all models of the the following:

• PC300 PL (6892, 6862)
• IntelliStation MPRO (6889, 6898)
• IntelliStation ZPRO (6865)
• IntelliStation EPRO (6893)
  
  
  Supported operating systems
• Microsoft Windows 95 OSR 2.1 including Direct 3D support
• Windows 98 including Direct X .5
• Windows NT 3.5.1
• Windows NT 4.0 SP3 including OpenGL 1.1 MCD, Direct 3D and Heidi support
• OS/2 Warp (V 3.0)
• OS/2 Warp (V4.0)
• OS/2 2.1
• Windows for Workgroups 3.11

• T55D (9513-DW0 and 9513-DG0)
• T85D (9519-DW0 and 9519-DG0)
• 15-pin Analog Port

Limitations: None