IBM

CardSoft PCMCIA drivers package for Windows NT - ThinkPad General

Applicable countries and regions
Attention: This driver can only be used with the machines on the supported list on this page. Use of these drivers with any other machine is strictly prohibited.

This package provides the PC Card software for Windows NT 4.0 users.

This package enableso r updates the PC Card function of the following ThinkPad computers:
- ThinkPad 380, 380D, 385D, 380E, 380ED, 385ED, 380XD, 385XD, 380Z
- ThinkPad 380XD, 385XD, 380Z
- ThinkPad 560X, 560Z
- ThinkPad 600, 600E
- ThinkPad 770, 770E, 770ED, 770X

Note: See the bottom of this page for links to language specific versions of this file.
  File details
Version 3.10.04j
Release Date 1998/10/19
File link   File size   File description
pctpcwnt.exe   1,206,272   CardWizard PCMCIA Driver for Windows NT

pctpcwnt.txt   4,213   README: CardWizard PCMCIA Driver for Windows NT

  Additional information

Attention: This driver can only be used with the machines on the supported list on this page. Use of these drivers with any other machine is strictly prohibited.

Released Versions
Version 3.00.08 Initial Release for ThinkPad 770
Version 3.10.01 Support for ThinkPad 560X and problem fixes
Version 3.10.03 Support for ThinkPad 380XD, 385XD and a problem fix
Version 3.10.04f Support for ThinkPad 600, 770E, 770ED, Mobile Pentium II models of ThinkPad 380XD and 385XD, and a problem fix
Version 3.10.04j Support for ThinkPad 380Z, 560Z, 600E and 770X


Summary of Changes

3.10.01

  • (New) Support for ThinkPad 560X.
  • (Fix) Can not assign the IRQ10 for PC Cards.
  • (Fix) Can not use Combo cards.
  • (Fix) Can not use the IBM 3270/5250 card.

3.10.03

  • (New) Support for ThinkPad 380XD and 385XD.
  • (Fix) Can not use IRQ3 / IRQ4 on the SelectaDock I/II.

3.10.04f

  • (New) Support for ThinkPad 600, 770E, 770ED, Mobile Pentium II models of ThinkPad 380XD and 385XD.
  • (Fix) Can not enter the suspend mode via the standby mode.

3.10.04j

  • (New) Support for ThinkPad 380Z, 560Z, 600E and 770X

Installation instructions
To determine if you have to update the PC Card software or not, please refer to the "Summary of Changes" section.

Note:

  • If your system is connected to a network, log off before starting installation.
  • You must install the Windows NT Service Pack before you install CardWizard.

To install the PC Card support software for Windows NT, you must be logged on to Windows NT as an administrator.

  1. Remove any PC Cards that are in the slot.
  2. Extract the drivers onto the hard disk drive.
  3. Be sure to read the README.TXT file before you start installation. Apply any relevant information from this file.
  4. Click Start, then click Run...
  5. Type C:\DRIVERS\WNT\PCCARD\SETUP and click OK. Follow the instructions on the screen.

National Language Support
Only some drivers will be available in other languages. If you do not see a listing like this for additional languages, then that driver is available in English only. The English driver will work in ALL countries. This driver is available in the following language format.
Note: If the version numbers below do not match the version number given above, then the updated driver listed above is available in ENGLISH only.

  • Dansk (DK) v3.10.04k - Disk1
  • Finnish (FI) v3.10.04k - Disk 1
  • French (FR) v3.10.04k - Disk 1
  • German (GR) v3.10.04k - Disk 1
  • Italian (IT) v3.10.04k - Disk 1
  • Dutch (NE) v3.10.04k - Disk 1
  • Norwegian (NO) v3.10.04k - Disk 1
  • Spanish (SP) v3.10.04k - Disk 1
  • Swedish (SV) v3.10.04k - Disk 1
     

  Applicable countries and regions
Worldwide
Back to top
Document id:  DSHY-3NPUQX
Last modified:  2004-09-20
Copyright © 2009 IBM Corporation