Video driver (NM2200) for Windows NT 4.0 - ThinkPad 380Z, 570/E, 600E

Notes:

• This driver will now automatically extract to your hard drive. It will only extract under Windows 95, Windows 98, Windows NT,
  and Windows 2000.
• Windows NT 4.0 Service Pack 3 or later needs to be installed before applying this video drivers.

This Additional Information field contains the following sections:
I. Summary of changes
II. Installation instructions
III. Determining which version is installed

I. Summary of changes
version 4.30.04Q
-(Fix) The system will hang when switching the display device using Fn+F7 after the screen saver 3D Maze has been running for 15 minutes

Click here for a complete list of changes fixed by this driver update.
 

II. Installation instructions

1. Boot Windows NT 4.0 and logon with administrative privilege.
2. Extract the drivers onto the hard drive.
3. Click Start, point to Settings, then click Control Panel .
4. Double-click the Display icon in the window. The Display Settings dialog window will appear.
5. Click the Settings tab.
6. Click the Display Type... button. The Display Type dialog window will appear.
7. Click the Change... button in the Adapter Type field. The Select Device dialog window will appear.
8. Click the Have Disk... button in the dialog box.
9. In the Copy manufacturing file's from: dialog box, type C:\DRIVERS\WNT\DISPLAY\ and click the OK button. If you extracted the files to a different location, specify that location instead. The device list will appears.
10. Select NeoMagic MagicMedia 256AV choice from the Models field; then click the OK button.
11. Click the Yes button to confirm that you are installing a third-party driver.
12. Click the OK button after the copy is done.
13. Click the Close button to close the Display Type window.
14. Click the Close button to close the Display Properties window.
15. Click the Restart Now button when Windows NT prompts you to restart.
16. After the system restarts and the Invalid Display Settings message appears , click the OK button.
17. The Display Properties window will appear. Select your screen parameter from the color palette, desktop area, and refresh frequency.
18. Click the Test button and make sure the selected mode is displayed correctly on the screen.
19. Click the OK button in the Display Properties window.

III. Determining which version is installed

1. Start and logon Windows NT.
2. Click Start, point to Settings, then click Control Panel .
3. Double-click the Display icon in the window. The Display Settings dialog window will appear.
4. Select the NeoMagic tab. The number beside the picture of a diskette is the version number.