Supplement file diskette III for Windows 95 - ThinkPad 570/E, A2*, A3*, T2*, X2*, TransNote

Click here for instructions and limitations on downloading and creating the diskette.

This Additional Information field contains the following sections
I. Summary of changes
II. Microsoft Windows versioning information
III. Installation instructions for Windows 95 OSR0 or OSR1
IV. Installation instructions for Windows 95 OSR2, OSR2.1, or OSR2.5
V. Determining which version is installed

I. Summary of Changes
Version 1.00

• (New) Added TI 1450 Support.
• (New) Added Port Replicator Support.
  

Version 1.01

• (New) Added TI 1420 Support
• (New) Added support for the 570E
  

Version 1.02

• (New) Add LCD panel resolution 1400x1050
  

Version 1.03

• (Fix) Add Max resolution in 1400x1050 attribute
  

Version 1.04

• (New) Support for Ricoh CardBus controller.
  

Version 1.05

• (New) Support for INTEL 440MX Chip Set.
  

Version 1.06

• (New) Support for LCD panel resolution 1600x1200.
  

Version 1.07

• (New) Support for A22e model by update of INF file.
• (New) Support for T23 model.
• (New) Support for X22, X23, X24, A30 and A30p model
  

II. Microsoft Windows versioning information
Note: If you use the Product Recovery CD-ROM shipped with your ThinkPad system to restore the Microsoft Windows 95 preload environment, you do not need this package. This package is required when you install Windows 95 without the Product Recovery CD-ROM.

The following versions of Windows 95 are available for your computer:

• Retail Release Version (OSR0)
  
• Service Pack Version 1 (OSR1)
  
• OEM Service Release Version 2 without USB Supplement (OSR2)
  
• OEM Service Release Version 2 with USB Supplement (OSR2.1)
  
• OEM Service Release Version 2.5 (OSR2.5)

The OSR0 is an off-the-shelf version of Windows 95 and is available at any retail store.
The OSR1 can be downloaded from the Microsoft Internet home page: http://www.microsoft.com .
The OSR2.x is available only as preloaded versions.

Your version of Windows 95
You can check which version of Windows 95 you are using by clicking Start and moving the cursor to Settings and Control Panel, and then double-clicking System. You can check the version in this window. Read the numbers under System.

• 4.00.950 means that it is Windows 95 OSR0.
  
• 4.00.950a means that it is Windows 95 OSR1.
  
• 4.00.950B means that it is Windows 95 OSR2 or OSR2.1.
  
• 4.00.950C means that it is Windows 95 OSR2.5.

III. Installation instructions for Windows 95 OSR0 or OSR1

1. Copy all the cabinet files and installation programs to your hard disk drive.
   1. Make a temporary directory (for instance, C:\WIN95) and make sure enough hard disk drive space is available to store the cabinet files and installation programs (the required free space varies depending on the language of Windows 95).
   2. Copy all the cabinet (.CAB) files and installation programs from the \WIN95 directory of Windows 95 retail CD-ROM.
      • Type COPY src_cd:\WIN95\*.* destination and press Enter.
        Where src_CD is the drive letter of CD-ROM drive (e.g. D, E,..) and destination is the drive letter and temporary directory made in step 1a (e.g. C:\WIN95).
        
2. Copy updated files from W95SUPP directory to the temporary directory.
3. • Type COPY C:\W95SUPP\OSR0INF\*.* destination and press Enter.
     Where destination is the drive letter and temporary directory made in step 1a (e.g. C:\WIN95).
     
4. Start Installation from the temporary directory.
   1. Run SETUP.EXE in the temporary directory
   2. Refer to the Windows 95 documentation and instructions on the screen to complete the installation.
      
5. Install INTEL INF Installation Utility.
   1. Boot the Windows System
   2. Run the InstallShield installation program Setup.exe in INTELINF directory.
   3. Follow the on-screen instructions.
   4. Reboot the system.
      
6. If needed, apply Windows 95 Service Pack 1 available from Microsoft Internet home page.
   
7. If needed, remove all the files in the temporary directory and the directory itself after installation is completed to save the hard disk drive free space.
   
8. Place Software Selections CD onto CD-ROM drive.
   1. Open My Computer, CD(open from right click), Data, Win95 and country folder.
   2. W95supp includes same files as this diskette. W95upd includes newly released drivers.
   3. Follow text files in the W95upd folder.

IV. Installation instructions for Windows 95 OSR2, OSR2.1, or OSR2.5

1. Copy all the cabinet files and installation programs to your hard disk drive.
   1. Make a temporary directory (for instance, C:\WIN95) and make sure enough hard disk drive space is available to store the cabinet files and installation programs (the required free space vary depending on the language of Windows 95).
   2. Copy all the cabinet (.CAB) files and installation programs from the \WIN95 directory of Windows 95 OSR2 CD.
      • Type COPY src_CD:\WIN95\*.* destination and press Enter.
        Where src_CD is the drive letter of CD-ROM drive (e.g. D, E,..) and destination is the drive letter and temporary directory made in step 1a (e.g. C:\WIN95)
        
2. Copy updated files from W95SUPP directory to the temporary directory
   1. Type COPY C:\W95SUPP\OSR2INF\*.* destination and press enter
   2. Type COPY C:\W95SUPP\CARDBUS\*.* destination and press enter
      Where destination is the drive letter and temporary directory made in step 1a (e.g. C:\WIN95).
      
3. Start Installation from the temporary directory
   1. Run SETUP.EXE in the temporary directory.
   2. Refer to the Windows 95 documentation and instructions on the screen to complete the installation.
      
      Next step is to install some fix modules on Windows 95 OSR2.X.
      
      
4. Install PC Card driver fix
   1. Run C:\W95SUPP\QFE444\PCCARDUP.EXE.
   2. Reboot the system
      
      The last step is to install OSR 2.X. To install the OSR2.X, refer to its documentation. As for USB Supplement file update, please see \other\usb folder (Windows 95 SR2.1) in your Windows 95 backup CD-ROM.
      
      
5. If needed, remove all the files in the temporary directory and the directory itself after installation is completed to save the hard disk drive free space.
   
6. Install INTEL INF Installation Utility.
   1. Boot the Windows System
   2. Run the installShield installation program Setup.exe in INTELINF directory.
   3. Follow the on-screen instructions.
   4. Reboot the system.
      
7. Place Software Selections CD onto CD-ROM drive.
   1. Open My Computer, CD(open from right click), Data, Win95 and country folder.
   2. W95supp includes same files as this diskette. W95upd includes newly released drivers.
   3. Follow text files in the W95upd folder.

V. Determining which version is installed
This Package contains the following files: