Modem driver (AMR daughter card) for Windows 2000 - ThinkPad R32

This package provides the CDC Modem driver for Microsoft Windows 2000. The Modem driver enables or updates the Modem function of ThinkPad AMR Modem (CDC) of the following ThinkPad computers:

- ThinkPad R32 (except Ethernet Wireless integrated model *1)

Note: *1 If your ThinkPad R32 is the Ethernet Wireless integrated model, use the ThinkPad R32 AMR Modem(Wireless LAN Combo)driver for Windows 2000 instead of this package.

File details

Version	2.1.20a
Release Date	2006/04/27

File link	File size	File description
1mm211ww.exe	1,001,584	Modem driver (AMR daughter card) for Windows 2000
1mm211ww.txt	4,226	README for Modem driver (AMR daughter card) for Windows 2000

Additional information

Contents

	Summary of changes
	Installation instructions
	Determining which version is installed

Note: If your ThinkPad R32 system is the Ethernet and wireless integrated model, install the Modem driver (AMR Wireless) for Windows 2000 instead of this package.

Summary of changes

Version 2.1.20a

(Fix) Cannot dial with pulse in Spain

Note: There is no functional change in the driver itself from v2.1.20. If version v2.1.20 is already installed, and no problems exists, you do not need to install this release.

Version 2.1.20

(Fix) Fix connectivity issue in Italy

Version 2.1.7

(New) Support ThinkPad R32

Installation instructions

Notes:

To determine if you should update the Modem drive, refer to the Summary of changes section.
If the audio driver has not been installed on the system, install the audio driver prior to the modem driver.

Start Windows 2000 and logon with administrative privileges.
Extract this package onto the hard drive.
Click Start, then click Run.
Type C:\DRIVERS\W2K\MODEM\SETUP.EXE in the Open box and click OK.
Follow the instructions on the screen.
Restart the system for the driver to take effect.

Unattended installation
This is for system administrators' use only.

Start Windows and logon with administrative privileges.
Extract the drivers to the hard drive.
Click Start, then click Run.
Type C:\DRIVERS\W2K\MODEM\SETUP.EXE -S, and click OK.

Uninstall instructions

Start Windows 2000 and logon with administrative privileges.
Click Start, select Settings, and then click Control Panel.
Double-click the Add/Remove Programs icon.
Select Agere Systems AC'97 Modem.
Click Change/Remove.
Click Yes in the confirmation window.
When asked to restart the system, click Yes.

Note: If you do not remove the modem hardware, then Windows will detect the modem again on the next boot.

Determining which version is installed

Start Windows 2000
Click Start, point to Settings, then click Control Panel.
Double-Click the Phone and Modem Options icon.
Click the Modems tab.
Select Agere Systems AC'97 Modem, then click the Properties button.
Select the Diagnostics tab and click the Query Modem button.
Check Command | Response window to check the result of ATI3. The version of the driver installed is displayed.

Note: This version information does not show minor version. For example, the version 2.1.20a shows version 2.1.20.

Applicable countries and regions

Worldwide

Document id: MIGR-43172

Last modified: 2007-01-23