Modem driver (AMR wireless combo card) for Windows 2000 - ThinkPad R32

NOTE: If your ThinkPad R32 system is not an ethernet wireless integrated model, then install the modem driver (AMR daughter card) for Windows 2000 instead of this package.

This Additional Information field contains the following sections
I. Summary of changes
II. Installation instructions
III. Determining which version is installed

I. Summary of changes
Version 2.1.7

• (New) Support ThinkPad R32.
  

Version 2.1.20

• (Fix) Fix connectivity issue in Italy.

II. Installation instructions
NOTE: If the audio driver has not been installed on the system, install the audio driver prior to the modem driver.

1. Start Windows 2000 and log on with the user ID authorized as an administrator.
2. Extract this package onto the hard disk drive.
3. Click Start and then click Run.
4. Type C:\DRIVERS\W2K\MODEM\SETUP.EXE in the Open box and click the OK button.
5. Follow the instructions on the screen.
6. Restart the system for the driver to take effect.

Unattended installation
NOTE: This is for system administrators' use only.

1. Start Windows.
2. Logon with administrative privileges.
3. Extract the drivers to the hard disk drive.
4. Click Start and then click Run.
5. Type C:\DRIVERS\W2K\MODEM\SETUP.EXE -S, then click OK.

Manual uninstallation

1. Start Windows 2000 and logon with administrative privileges.
2. Click Start, select Settings, and then click Control Panel.
3. Double-click Add/Remove Programs.
4. Select Agere Systems AC'97 Modem.
5. Click Change/Remove.
6. Click Yes in the confirmation window.
7. When asked to restart the system, click the Yes button.
   NOTE: If you do not remove the modem hardware, then Windows will detect the modem in the next boot.

III. Determining which version is installed

1. Start Windows 2000
2. Click Start, point to Settings, then click Control Panel.
3. Double-click the Phone and Modem Options icon.
4. Click the Modems tab.
5. Select Agere Systems AC'97 Modem then click the Properties button.
6. Select the Diagnostics tab and click the Query Modem button.
7. Check the Command | Response window to verify the result of ATI3. The version of the driver installed is displayed.