Summary of changes
	Installation instructions
	Determining which version is installed

Version 2.57

• Important: The following systems are supported by Presentation Director version 3.02 or later.
  
  • ThinkPad R60, R60e
    
  • ThinkPad T60, T60p
    
  • ThinkPad X60, X60s, X60 Tablet
    
  • ThinkPad Z61e, Z61m, Z61p, Z61t
    
• (New) Change to show "Presenter Mode" in Fn+F7 On-Screen menu as default.
  
• (Fix) Move icons to XGA even if the screen resolution is not changed.
  
• (Fix) Fail to capture the current settings ('Capture' button) when the notebook LCD resolution is smaller than the attached external monitor.

Click here for a complete list of changes fixed by this driver update.

• The following utilities are also required to enable the Fn + F7 function:
  • ThinkPad Power Management Driver V1.21 or later
  • Hotkey Features package V1.02.0271 or later.
    
    
• If you have ThinkPad Configuration version 1.24 or earlier installed, uninstall it and reboot before installing this package. Then install the following packages also:
  • ThinkPad Configuration package version 1.30 or later
  • ThinkPad Battery MaxiMiser and Power Management Features package version 1.30 or later
  • ThinkPad EasyEject Utility version 1.30 or later
    
    
• For ThinkPad T23 systems, BIOS Version 1.15 (1AET59WW) or later is required to integrate the Fn + F7 hot key function.
• For ThinkPad A30 and A30p systems, BIOS version 1EET70WW (1.16) or later is required to integrate the Fn + F7 hot key function.
• For ThinkPad G41 Systems, ThinkPad Display Driver (NVIDIA GeForce FX Go5200) Version 6.2.2.7 or later is required.
  
  

1. Start Windows XP, 2000 and logon with a User ID of an Administrator.
2. Extract this package onto the hard drive.
3. Click Start and select Run.
4. Type the path where you extracted the package in step 2, and click OK.
5. Follow the instructions on the screen.
   
   

1. Start Windows XP, 2000 and logon with a User ID of Administrator.
2. Extract this package onto the hard drive.
3. Click Start and select Run.
4. Type the path where you extracted the package in the above installation guide and add -S -SMS parameter to SETUP, and click OK.
5. Follow the instructions on the screen.
   
   

1. Click Start, point to Programs, point to ThinkPad, point to ThinkPad Utilities, then click Presentation Director.
2. To display the version, after starting Presentation Director, click the New Scheme... button under "Manage Presentation Director Settings".

Presentation Director after version 2.11.001 will be located at:

1. Click Start, point to Programs, point to ThinkVantage, then click Presentation Director.
2. To display the version, after starting Presentation Director, click the New Scheme... button under "Manage Presentation Director Settings".