Video driver (SavageIX8) for Windows 95/98/Me - ThinkPad A22e, T2*

Click here for instructions on how to transfer files greater than 1.44 MB to multiple floppies.

This Additional Information field contains the following sections:
I. Summary of changes
II. Installation instructions for Windows 98/Me/95 OSR2.x
III. Installation instructions for Windows 95 OSR0 and SP1
IV. Determining which version is installed

I. Summary of changes
version 7.15.37

• (Fix) Screen freezes when user attempts scroll up or down in Windows Explorer on Windows 95.
• (Fix) Screen freezes when running Lotus ScreenCam 98.
• (Fix) TV contrast cannot be lowered from the highest level.

Click here for a complete list of changes made by this driver update.

II. Installation instructions for Windows 98/Me/95 OSR2.x

1. Start Windows 95/98/Me.
2. Extract the Video Features for Windows 95/98/Me onto the hard disk drive.
3. Click Start, then click Run.
4. In the Run dialog window, type C:\DRIVERS\W9X\DISPLAY\SETUP.EXE to install the video driver. Click the OK button to start the installation process. If you extracted the files to a different location, specify that location instead.
5. Follow the instructions on the screen.

1. From the Control Panel, double-click the Add/Remove Programs icon.
2. Select the SavageIX item in the list box.
3. Click the Add/Remove button to remove the display driver. The utilities should be removed as well if they were installed with the driver.

1. Start Windows 95.
2. Extract the drivers to the hard disk drive.
3. Click Start, point to Settings, then click Control Panel.
4. Double-click the System icon.
5. Click the Device Manager tab.
6. Expand Display Adapters.
7. If there is a S3 only adapter, remove it.
8. At the Confirm Device Removal window, click OK.
9. At the Restart confirmation message window, click NO.
10. Expand Other Devices and remove PCI VGA-Compatible Display Adapter.
11. At the Confirm Device Removal window, click OK.
12. At the PCI VGA-Compatible Display Adapter Has a ROM window, click Test.
13. Shutdown and restart the system.
14. When the system starts, the New Hardware Found window appears. Select Driver provided by hardware manufacturer and click OK.
15. Specify the directory where the driver files were extracted and click OK.
16. At the System Settings Change window, click YES to restart the system.

1. Start Windows 95.
2. Extract the drivers to the hard disk drive.
3. Click Start, point to Settings, then click Control Panel.
4. Double-click the System icon.
5. Click the Device Manager tab.
6. Expand Display Adapters .
7. Select S3 Inc. Savage/IX w/MV and click Properties.
8. Select the Driver tab.
9. Click the Change Driver button.
10. Click the Have Disk button.
11. Specify C:\DRIVERS\W9X\DISPLAY\ and click OK.
12. At the Select Device window, select S3 Inc. Savage/IX w/MV and click OK.
13. At the S3 Inc. Savage/IX w/MV Properties window, click OK.
14. At the Insert Disk window, click OK.
15. Specify C:\DRIVERS\W9X\DISPLAY\ and click OK.
16. At the System Settings have changed window, click Yes to restart the system.

1. Click Start, point to Settings, then click Control Panel.
2. Double-click the Display icon.
3. Click the Settings tab.
4. Click the Advanced (Properties) button.
5. Click the S3duovue tab.
6. Click the Information button to check the version information. For example, 4.12.01.7089-7.15.18.

1. Click Start, point to Settings, then click Control Panel.
2. Double-click the Display icon.
3. Click the S3duovue tab.
4. Click the Information button to check the version information. For example, 4.12.01.7116-7.15.37.