IBM

Intel Priority Packet Software for Windows 95(OSR2)/98/Me/NT 4.0/2000 - ThinkPad A2*, T2*, X20, TransNote
Applicable countries and regions
This package provides Intel(R) Priority Packet software for Microsoft Windows 95(OSR2)/98/Me/NT 4.0/2000, and can be used in the following ThinkPad computers with IBM 10/100 EtherJet Mini PCI Adapter with 56K Modem (Intel Mini PCI Ethernet-Modem Combo Card) or Intel Mini PCI Ethernet Card.
- ThinkPad A20m, A20p
- ThinkPad T20
- ThinkPad X20
- ThinkPad A21e, A21m, A21p
- ThinkPad T21
- ThinkPad TransNote *1
NOTES:
*1 Windows 98SE/Me/2000 only

Intel(R) Priority Packet is a traffic prioritization utility that enables an administrator to set up priority filters to tag frames with user priority levels. The Intel(R) Priority Packet software does mapping network policy to 802.1p user priority levels or HPQ in the NIC (Network Information Card). For the detail information, access Intel Home Page (URL http:--www.intel.com).

- This program is language independent and can be used with any language system.
  File details
Version 1.41
Release Date 2000/09/14
File link   File size   File description
intlprpk.exe   2,148,875   version 1.41 - Intel Priority Packet Software for Windows 95(OSR2)/98/Me/NT 4.0/2000
intlprpk.txt   3,192   README for version 1.41 - Intel Priority Packet Software for Windows 95(OSR2)/98/Me/NT 4.0/2000
  Additional information

NOTE: This driver will now automatically extract to your hard disk drive. It will only extract under Microsoft Windows 95, Microsoft Windows 98, Microsoft Windows Me, Microsoft Windows NT, and Microsoft Windows 2000.

This Additional Information field contains the following sections:
I. Summary of changes
II. Installation instructions
III. Determining which version is installed

I. Summary of changes
version 1.1
- (New) Initial release for ThinkPad A20m, A20p and T20.

version 1.41
- (Fix) An installation issue for some European countries under Windows 2000.
- (New) Support for Windows Me.
- (New) Initial release for ThinkPad TransNote

II. Installation instructions
 (Intel(R) PRO/100+ Mini PCI) The name of the Ethernet device driver is Intel(R) PRO/100+ MiniPCI in the Device Manager and in the Network Control Panel.

  1. Start Windows.
  2. Extract this package onto the hard disk drive.
  3. Click Start, then click Run.
  4. Specify the installation program SETUP.EXE with full path you extracted in the step 2 and click OK.
  5. Follow instructions on the screen.

III. Determining which version is installed

  1. Start Windows.
  2. Click Start, point to Settings, then click Control Panel. If Intel(R) Priority Packet icon is not found in the Control Panel, the software is not installed in your computer.
  3. Double-click the Intel(R) Priority Packet icon.
  4. Click the OK button.
  5. Click the Statistics tag.
  Applicable countries and regions
Worldwide
Back to top
Document id:  MIGR-4P52BF
Last modified:  2002-10-02
Copyright © 2009 IBM Corporation