BIOS Update (Bootable CD) - Lenovo V100

	Summary of changes
	Update the BIOS
	Determining which version is installed
	Initializing the BIOS
	BIOS information

Version 62ETC1WW (1.11)

• (New) Update microcode to support new Merom CPU
• (Fix) Fix sometimes Atheros MIMO card will cause system blue screen

Version 62ETB8WW (1.08)

• (New) Support for Microsoft Windows Vista

Version 62ETB1WW (1.01)

• (Fix) When system boot from LAN, using Ghost 8.0 will cause system hang up.

Version 62ETA9WW

• (New) (Initial release) Support for the 3000 V100.
  
  

Notes:

• The BIOS is downloaded as an ISO CD image file, and must be burned onto a CD-R/RW Compact Disc to create a bootable CD.
• Embedded controller version 62ECB2WW (01.B2) is recommended. After updating the BIOS, please download and install the ISO CD image file for the embedded controller package
  

  	Lenovo V100 Embedded Controller version 62ECB2WW (01.B2)
  	README for Lenovo V100 Embedded Controller version 62ECB2WW (01.B2)

Attention:
Do not turn off or suspend the system until the update has been completed. If you turn off or suspend the system while the update is still in progress, the system board may have to be replaced.

1. Firmly connect the AC adapter to the system.
2. Shutdown the computer.
3. Turn on the computer.
4. While the "Press F1 to enter SETUP, Press F12 to display Boot Menu" message is displayed at the lower-left area of the screen, press the F12 key.
5. In the Boot Menu, Select the IDE CD: XXXXX, press enter to boot the system with the optical disc.
6. While the "BIOS Version: 62ETBxWW (1.xx)", "Please press "Y" key to start Flash Process!!" message is displayed on the screen, press the Y key, the Phoenix Phlash16 Utility will begin to update the new BIOS.
   
   After the update has been completed, the Phoenix Phlash16 utility will show a window with following message: "Flash memory has been successfully programmed", "PRESS ANY KEY TO RESTART THE SYSTEM". If the system does not restart, TURN THE POWER OFF, THEN ON.
   

1. Turn on the computer.
2. While the "Press F1 to enter SETUP, Press F12 to display Boot Menu" message is displayed at the lower-left area of the screen, press the F1 key. The PhoenixBIOS Setup Utility menu will be displayed. If a password prompt appears, type the correct password.
3. Verify the BIOS Version.
4. Turn off the computer.

1. Turn on the system.
2. While the "Press F1 to enter SETUP, Press F12 to display Boot Menu" message is displayed at the lower-left area of the screen, press the F1 key. The PhoenixBIOS Setup Utility menu will be displayed. If a password prompt appears, type the correct password.
3. Press the F9 key to load default configuration.
4. Select Yes.
5. Press the F10 key to save default configuration and exit.
6. Select Yes.

Notes:

• After initialization you may need to reapply some settings that you had changed previously.
• After the initialization has been completed, the system restarts automatically.