Ricoh Multi Card Reader Driver for Windows Vista, XP - ThinkPad R61, R61i, R400, R500, T61, T61p, T400, T500, W500, W700, W700ds, Z60m

NOTES

• When upgrading but not clean installing this driver in Windows XP and Windows XP SP1, the ThinkPad SD Storage and Standard Host Controller Bus Driver (Q830908) must be installed.
  
• Windows Vista and Windows XP SP2 does not need the ThinkPad SD Storage and Standard Host Controller Bus Driver (Q830908).

	Summary of changes
	Installation instructions
	Uninstallation instructions
	Determining which version is installed

Version 3.54.02

• (New) Added support for 7-in-1 Media Card Reader. In response, the software name was changed from Ricoh 4-in-1 Media Card Reader Driver to Ricoh Multi Card Reader Driver.
• (New) Added support for ThinkPad W700ds.
• (New) Added support for Dutch and Brazilian Portuguese installer program.
• (Fix) Fixed an issue that caused Blue Screen on Death with System Enable/ Disable with IO test on Windows Logo Kit (WLK) 1.1.

Version 3.52.02

• (New) Added some SSID.
• (New) Updated xD Icon design.
• (Fix) The Memorystick and xD devcies don't work when the system memory exceeds 4GB.
• (Fix) Kingston MMC plus 1GB might not work properly.
• (Fix) SanDisk RS-MMC 1GB might not work properly.

Version 3.51.01

• (New) Added some SSID/SVID for MS and xD x86 drivers.
• (New) Summarized Windows Vista x86/x64 drivers.
• (New) Supported uninstall feature on "Programs and features".
• (New) Changed user interface of program installer.
• (New) Added WHQL signature files for all drivers.
• (New) Updated to support resource rebalancing for Windows Vista.
• (Fix) It becomes impossible to access the xD-Picture card without rebooting the computer if once failing to recognize the card.
• (Fix) Kingston RS-MMC 512MB isn't recognized on Windows Vista x64.
• (Fix) Flash Media Card may not be recognized after booting the computer with a CardBus Card.

• (New) (Initial release) Support for Microsoft Windows Vista.
  
  

• If your computer runs satisfactorily now, it may not be necessary to update the software. To determine if you should update the software, refer to the Version Information section.

1. Start Windows and logon with administrative privileges.
   
2. Double-click the driver package to extract it to your hard drive.
   The default location is C:\DRIVERS\WIN\4IN1
3. For Windows Vista, click Start, select All Programs, select Accessories, then click Run...
   For Windows XP, click Start and then click Run...
   
4. Click Browse.
5. Select the folder where the package was extracted in Step 2.
6. Select SETUP.EXE.
7. Click Open.
8. Click OK.
9. Follow the instructions on the screen.
   
   

• Note: This is for system administrators use only.
  
  Refer to the Manual Install section, and download and expand the files.
• At the command line, execute SETUP.EXE with the -s option.
  Example: [Path where the files were extracted]\SETUP -s
  
  

Manual Uninstall

[Windows Vista]
This program can be uninstalled in Program and features of Control Panel.

[Windows XP]
Uninstallation is not supported.

1. Open Control Panel.
2. Open Uninstall a program.
3. Find RICOH R5C83x/84x Flash Media Controller Driver Ver.xxx .
   You can determine the version of the driver here.

[Windows XP]

1. Open Control Panel.
2. Open Add or Remove Programs.
3. Find RICOH R5C83x/84x Flash Media Controller Driver Ver.xxx.
   You can determine the version of the driver here.